Array API#

The test of a first-rate intelligence is the ability to hold two
opposed ideas in the mind at the same time, and still retain the
ability to function.
— F. Scott Fitzgerald

For a successful technology, reality must take precedence over public
relations, for Nature cannot be fooled.
— Richard P. Feynman

Array structure and data access#

These macros access the PyArrayObject structure members and are defined in ndarraytypes.h. The input argument, arr, can be any PyObject* that is directly interpretable as a PyArrayObject* (any instance of the PyArray_Type and its sub-types).

int PyArray_NDIM(PyArrayObject *arr)#: The number of dimensions in the array.

int PyArray_FLAGS(PyArrayObject *arr)#: Returns an integer representing the array-flags.

int PyArray_TYPE(PyArrayObject *arr)#: Return the (builtin) typenumber for the elements of this array.

int PyArray_SETITEM(PyArrayObject *arr, void *itemptr, PyObject *obj)#: Convert obj and place it in the ndarray, arr, at the place pointed to by itemptr. Return -1 if an error occurs or 0 on success.

void PyArray_ENABLEFLAGS(PyArrayObject *arr, int flags)#: New in version 1.7.

Enables the specified array flags. This function does no validation, and assumes that you know what you’re doing.

void PyArray_CLEARFLAGS(PyArrayObject *arr, int flags)#: New in version 1.7.

Clears the specified array flags. This function does no validation, and assumes that you know what you’re doing.

void *PyArray_DATA(PyArrayObject *arr)#

char *PyArray_BYTES(PyArrayObject *arr)#: These two macros are similar and obtain the pointer to the data-buffer for the array. The first macro can (and should be) assigned to a particular pointer where the second is for generic processing. If you have not guaranteed a contiguous and/or aligned array then be sure you understand how to access the data in the array to avoid memory and/or alignment problems.

npy_intp *PyArray_DIMS(PyArrayObject *arr)#: Returns a pointer to the dimensions/shape of the array. The number of elements matches the number of dimensions of the array. Can return NULL for 0-dimensional arrays.

npy_intp *PyArray_SHAPE(PyArrayObject *arr)#: New in version 1.7.

A synonym for PyArray_DIMS, named to be consistent with the shape usage within Python.

npy_intp *PyArray_STRIDES(PyArrayObject *arr)#: Returns a pointer to the strides of the array. The number of elements matches the number of dimensions of the array.

npy_intp PyArray_DIM(PyArrayObject *arr, int n)#: Return the shape in the n \(^{\textrm{th}}\) dimension.

npy_intp PyArray_STRIDE(PyArrayObject *arr, int n)#: Return the stride in the n \(^{\textrm{th}}\) dimension.

npy_intp PyArray_ITEMSIZE(PyArrayObject *arr)#

Return the itemsize for the elements of this array.

Note that, in the old API that was deprecated in version 1.7, this function had the return type int.

npy_intp PyArray_SIZE(PyArrayObject *arr)#: Returns the total size (in number of elements) of the array.

npy_intp PyArray_Size(PyArrayObject *obj)#: Returns 0 if obj is not a sub-class of ndarray. Otherwise, returns the total number of elements in the array. Safer version of PyArray_SIZE (obj).

npy_intp PyArray_NBYTES(PyArrayObject *arr)#: Returns the total number of bytes consumed by the array.

PyObject *PyArray_BASE(PyArrayObject *arr)#

This returns the base object of the array. In most cases, this means the object which owns the memory the array is pointing at.

If you are constructing an array using the C API, and specifying your own memory, you should use the function PyArray_SetBaseObject to set the base to an object which owns the memory.

If the NPY_ARRAY_WRITEBACKIFCOPY flag is set, it has a different meaning, namely base is the array into which the current array will be copied upon copy resolution. This overloading of the base property for two functions is likely to change in a future version of NumPy.

PyArray_Descr *PyArray_DESCR(PyArrayObject *arr)#: Returns a borrowed reference to the dtype property of the array.

PyArray_Descr *PyArray_DTYPE(PyArrayObject *arr)#: New in version 1.7.

A synonym for PyArray_DESCR, named to be consistent with the ‘dtype’ usage within Python.

PyObject *PyArray_GETITEM(PyArrayObject *arr, void *itemptr)#

Get a Python object of a builtin type from the ndarray, arr, at the location pointed to by itemptr. Return NULL on failure.

numpy.ndarray.item is identical to PyArray_GETITEM.

int PyArray_FinalizeFunc(PyArrayObject *arr, PyObject *obj)#: The function pointed to by the PyCapsule __array_finalize__. The first argument is the newly created sub-type. The second argument (if not NULL) is the “parent” array (if the array was created using slicing or some other operation where a clearly-distinguishable parent is present). This routine can do anything it wants to. It should return a -1 on error and 0 otherwise.

Data access#

These functions and macros provide easy access to elements of the ndarray from C. These work for all arrays. You may need to take care when accessing the data in the array, however, if it is not in machine byte-order, misaligned, or not writeable. In other words, be sure to respect the state of the flags unless you know what you are doing, or have previously guaranteed an array that is writeable, aligned, and in machine byte-order using PyArray_FromAny. If you wish to handle all types of arrays, the copyswap function for each type is useful for handling misbehaved arrays. Some platforms (e.g. Solaris) do not like misaligned data and will crash if you de-reference a misaligned pointer. Other platforms (e.g. x86 Linux) will just work more slowly with misaligned data.

void *PyArray_GetPtr(PyArrayObject *aobj, npy_intp *ind)#: Return a pointer to the data of the ndarray, aobj, at the N-dimensional index given by the c-array, ind, (which must be at least aobj ->nd in size). You may want to typecast the returned pointer to the data type of the ndarray.

void *PyArray_GETPTR1(PyArrayObject *obj, npy_intp i)#

void *PyArray_GETPTR2(PyArrayObject *obj, npy_intp i, npy_intp j)#

void *PyArray_GETPTR3(PyArrayObject *obj, npy_intp i, npy_intp j, npy_intp k)#

void *PyArray_GETPTR4(PyArrayObject *obj, npy_intp i, npy_intp j, npy_intp k, npy_intp l)#: Quick, inline access to the element at the given coordinates in the ndarray, obj, which must have respectively 1, 2, 3, or 4 dimensions (this is not checked). The corresponding i, j, k, and l coordinates can be any integer but will be interpreted as npy_intp. You may want to typecast the returned pointer to the data type of the ndarray.

Creating arrays#

From scratch#

PyObject *PyArray_NewFromDescr(PyTypeObject *subtype, PyArray_Descr *descr, int nd, npy_intp const *dims, npy_intp const *strides, void *data, int flags, PyObject *obj)#

This function steals a reference to descr. The easiest way to get one is using PyArray_DescrFromType.

This is the main array creation function. Most new arrays are created with this flexible function.

The returned object is an object of Python-type subtype, which must be a subtype of PyArray_Type. The array has nd dimensions, described by dims. The data-type descriptor of the new array is descr.

If subtype is of an array subclass instead of the base &PyArray_Type, then obj is the object to pass to the __array_finalize__ method of the subclass.

If data is NULL, then new unitinialized memory will be allocated and flags can be non-zero to indicate a Fortran-style contiguous array. Use PyArray_FILLWBYTE to initialize the memory.

If data is not NULL, then it is assumed to point to the memory to be used for the array and the flags argument is used as the new flags for the array (except the state of NPY_ARRAY_OWNDATA, NPY_ARRAY_WRITEBACKIFCOPY flag of the new array will be reset).

In addition, if data is non-NULL, then strides can also be provided. If strides is NULL, then the array strides are computed as C-style contiguous (default) or Fortran-style contiguous (flags is nonzero for data = NULL or flags & NPY_ARRAY_F_CONTIGUOUS is nonzero non-NULL data). Any provided dims and strides are copied into newly allocated dimension and strides arrays for the new array object.

PyArray_CheckStrides can help verify non- NULL stride information.

If data is provided, it must stay alive for the life of the array. One way to manage this is through PyArray_SetBaseObject

PyObject *PyArray_NewLikeArray(PyArrayObject *prototype, NPY_ORDER order, PyArray_Descr *descr, int subok)#

New in version 1.6.

This function steals a reference to descr if it is not NULL. This array creation routine allows for the convenient creation of a new array matching an existing array’s shapes and memory layout, possibly changing the layout and/or data type.

When order is NPY_ANYORDER, the result order is NPY_FORTRANORDER if prototype is a fortran array, NPY_CORDER otherwise. When order is NPY_KEEPORDER, the result order matches that of prototype, even when the axes of prototype aren’t in C or Fortran order.

If descr is NULL, the data type of prototype is used.

If subok is 1, the newly created array will use the sub-type of prototype to create the new array, otherwise it will create a base-class array.

PyObject *PyArray_New(PyTypeObject *subtype, int nd, npy_intp const *dims, int type_num, npy_intp const *strides, void *data, int itemsize, int flags, PyObject *obj)#: This is similar to PyArray_NewFromDescr (…) except you specify the data-type descriptor with type_num and itemsize, where type_num corresponds to a builtin (or user-defined) type. If the type always has the same number of bytes, then itemsize is ignored. Otherwise, itemsize specifies the particular size of this array.

Warning

If data is passed to PyArray_NewFromDescr or PyArray_New, this memory must not be deallocated until the new array is deleted. If this data came from another Python object, this can be accomplished using Py_INCREF on that object and setting the base member of the new array to point to that object. If strides are passed in they must be consistent with the dimensions, the itemsize, and the data of the array.

PyObject *PyArray_SimpleNew(int nd, npy_intp const *dims, int typenum)#: Create a new uninitialized array of type, typenum, whose size in each of nd dimensions is given by the integer array, dims.The memory for the array is uninitialized (unless typenum is NPY_OBJECT in which case each element in the array is set to NULL). The typenum argument allows specification of any of the builtin data-types such as NPY_FLOAT or NPY_LONG. The memory for the array can be set to zero if desired using PyArray_FILLWBYTE (return_object, 0).This function cannot be used to create a flexible-type array (no itemsize given).

PyObject *PyArray_SimpleNewFromData(int nd, npy_intp const *dims, int typenum, void *data)#: Create an array wrapper around data pointed to by the given pointer. The array flags will have a default that the data area is well-behaved and C-style contiguous. The shape of the array is given by the dims c-array of length nd. The data-type of the array is indicated by typenum. If data comes from another reference-counted Python object, the reference count on this object should be increased after the pointer is passed in, and the base member of the returned ndarray should point to the Python object that owns the data. This will ensure that the provided memory is not freed while the returned array is in existence.

PyObject *PyArray_SimpleNewFromDescr(int nd, npy_int const *dims, PyArray_Descr *descr)#

This function steals a reference to descr.

Create a new array with the provided data-type descriptor, descr, of the shape determined by nd and dims.

void PyArray_FILLWBYTE(PyObject *obj, int val)#: Fill the array pointed to by obj —which must be a (subclass of) ndarray—with the contents of val (evaluated as a byte). This macro calls memset, so obj must be contiguous.

PyObject *PyArray_Zeros(int nd, npy_intp const *dims, PyArray_Descr *dtype, int fortran)#: Construct a new nd -dimensional array with shape given by dims and data type given by dtype. If fortran is non-zero, then a Fortran-order array is created, otherwise a C-order array is created. Fill the memory with zeros (or the 0 object if dtype corresponds to NPY_OBJECT ).

PyObject *PyArray_ZEROS(int nd, npy_intp const *dims, int type_num, int fortran)#: Macro form of PyArray_Zeros which takes a type-number instead of a data-type object.

PyObject *PyArray_Empty(int nd, npy_intp const *dims, PyArray_Descr *dtype, int fortran)#: Construct a new nd -dimensional array with shape given by dims and data type given by dtype. If fortran is non-zero, then a Fortran-order array is created, otherwise a C-order array is created. The array is uninitialized unless the data type corresponds to NPY_OBJECT in which case the array is filled with Py_None.

PyObject *PyArray_EMPTY(int nd, npy_intp const *dims, int typenum, int fortran)#: Macro form of PyArray_Empty which takes a type-number, typenum, instead of a data-type object.

PyObject *PyArray_Arange(double start, double stop, double step, int typenum)#: Construct a new 1-dimensional array of data-type, typenum, that ranges from start to stop (exclusive) in increments of step . Equivalent to arange (start, stop, step, dtype).

PyObject *PyArray_ArangeObj(PyObject *start, PyObject *stop, PyObject *step, PyArray_Descr *descr)#: Construct a new 1-dimensional array of data-type determined by descr, that ranges from start to stop (exclusive) in increments of step. Equivalent to arange( start, stop, step, typenum ).

int PyArray_SetBaseObject(PyArrayObject *arr, PyObject *obj)#

New in version 1.7.

This function steals a reference to obj and sets it as the base property of arr.

If you construct an array by passing in your own memory buffer as a parameter, you need to set the array’s base property to ensure the lifetime of the memory buffer is appropriate.

The return value is 0 on success, -1 on failure.

If the object provided is an array, this function traverses the chain of base pointers so that each array points to the owner of the memory directly. Once the base is set, it may not be changed to another value.

From other objects#

PyObject *PyArray_FromAny(PyObject *op, PyArray_Descr *dtype, int min_depth, int max_depth, int requirements, PyObject *context)#

This is the main function used to obtain an array from any nested sequence, or object that exposes the array interface, op. The parameters allow specification of the required dtype, the minimum (min_depth) and maximum (max_depth) number of dimensions acceptable, and other requirements for the array. This function steals a reference to the dtype argument, which needs to be a PyArray_Descr structure indicating the desired data-type (including required byteorder). The dtype argument may be NULL, indicating that any data-type (and byteorder) is acceptable. Unless NPY_ARRAY_FORCECAST is present in flags, this call will generate an error if the data type cannot be safely obtained from the object. If you want to use NULL for the dtype and ensure the array is notswapped then use PyArray_CheckFromAny. A value of 0 for either of the depth parameters causes the parameter to be ignored. Any of the following array flags can be added (e.g. using |) to get the requirements argument. If your code can handle general (e.g. strided, byte-swapped, or unaligned arrays) then requirements may be 0. Also, if op is not already an array (or does not expose the array interface), then a new array will be created (and filled from op using the sequence protocol). The new array will have NPY_ARRAY_DEFAULT as its flags member. The context argument is unused.

NPY_ARRAY_C_CONTIGUOUS#: Make sure the returned array is C-style contiguous

NPY_ARRAY_F_CONTIGUOUS#: Make sure the returned array is Fortran-style contiguous.

NPY_ARRAY_ALIGNED#: Make sure the returned array is aligned on proper boundaries for its data type. An aligned array has the data pointer and every strides factor as a multiple of the alignment factor for the data-type- descriptor.

NPY_ARRAY_WRITEABLE#: Make sure the returned array can be written to.

NPY_ARRAY_ENSURECOPY#: Make sure a copy is made of op. If this flag is not present, data is not copied if it can be avoided.

NPY_ARRAY_ENSUREARRAY#: Make sure the result is a base-class ndarray. By default, if op is an instance of a subclass of ndarray, an instance of that same subclass is returned. If this flag is set, an ndarray object will be returned instead.

NPY_ARRAY_FORCECAST#: Force a cast to the output type even if it cannot be done safely. Without this flag, a data cast will occur only if it can be done safely, otherwise an error is raised.

NPY_ARRAY_WRITEBACKIFCOPY#: If op is already an array, but does not satisfy the requirements, then a copy is made (which will satisfy the requirements). If this flag is present and a copy (of an object that is already an array) must be made, then the corresponding NPY_ARRAY_WRITEBACKIFCOPY flag is set in the returned copy and op is made to be read-only. You must be sure to call PyArray_ResolveWritebackIfCopy to copy the contents back into op and the op array will be made writeable again. If op is not writeable to begin with, or if it is not already an array, then an error is raised.

NPY_ARRAY_BEHAVED#: NPY_ARRAY_ALIGNED | NPY_ARRAY_WRITEABLE

NPY_ARRAY_CARRAY#: NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_BEHAVED

NPY_ARRAY_CARRAY_RO#: NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_ALIGNED

NPY_ARRAY_FARRAY#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_BEHAVED

NPY_ARRAY_FARRAY_RO#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_ALIGNED

NPY_ARRAY_DEFAULT#: NPY_ARRAY_CARRAY

NPY_ARRAY_IN_ARRAY#

NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_ALIGNED

NPY_ARRAY_IN_FARRAY#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_ALIGNED

NPY_OUT_ARRAY#: NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_WRITEABLE | NPY_ARRAY_ALIGNED

NPY_ARRAY_OUT_ARRAY#

NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_ALIGNED | NPY_ARRAY_WRITEABLE

NPY_ARRAY_OUT_FARRAY#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_WRITEABLE | NPY_ARRAY_ALIGNED

NPY_ARRAY_INOUT_ARRAY#

NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_WRITEABLE | NPY_ARRAY_ALIGNED | NPY_ARRAY_WRITEBACKIFCOPY

NPY_ARRAY_INOUT_FARRAY#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_WRITEABLE | NPY_ARRAY_ALIGNED | NPY_ARRAY_WRITEBACKIFCOPY

int PyArray_GetArrayParamsFromObject(PyObject *op, PyArray_Descr *requested_dtype, npy_bool writeable, PyArray_Descr **out_dtype, int *out_ndim, npy_intp *out_dims, PyArrayObject **out_arr, PyObject *context)#: Deprecated since version NumPy: 1.19

Unless NumPy is made aware of an issue with this, this function is scheduled for rapid removal without replacement.

Changed in version NumPy: 1.19

context is never used. Its use results in an error.

New in version 1.6.

PyObject *PyArray_CheckFromAny(PyObject *op, PyArray_Descr *dtype, int min_depth, int max_depth, int requirements, PyObject *context)#

Nearly identical to PyArray_FromAny (…) except requirements can contain NPY_ARRAY_NOTSWAPPED (over-riding the specification in dtype) and NPY_ARRAY_ELEMENTSTRIDES which indicates that the array should be aligned in the sense that the strides are multiples of the element size.

In versions 1.6 and earlier of NumPy, the following flags did not have the _ARRAY_ macro namespace in them. That form of the constant names is deprecated in 1.7.

NPY_ARRAY_NOTSWAPPED#

Make sure the returned array has a data-type descriptor that is in machine byte-order, over-riding any specification in the dtype argument. Normally, the byte-order requirement is determined by the dtype argument. If this flag is set and the dtype argument does not indicate a machine byte-order descriptor (or is NULL and the object is already an array with a data-type descriptor that is not in machine byte- order), then a new data-type descriptor is created and used with its byte-order field set to native.

NPY_ARRAY_BEHAVED_NS#: NPY_ARRAY_ALIGNED | NPY_ARRAY_WRITEABLE | NPY_ARRAY_NOTSWAPPED

NPY_ARRAY_ELEMENTSTRIDES#: Make sure the returned array has strides that are multiples of the element size.

PyObject *PyArray_FromArray(PyArrayObject *op, PyArray_Descr *newtype, int requirements)#: Special case of PyArray_FromAny for when op is already an array but it needs to be of a specific newtype (including byte-order) or has certain requirements.

PyObject *PyArray_FromStructInterface(PyObject *op)#: Returns an ndarray object from a Python object that exposes the __array_struct__ attribute and follows the array interface protocol. If the object does not contain this attribute then a borrowed reference to Py_NotImplemented is returned.

PyObject *PyArray_FromInterface(PyObject *op)#: Returns an ndarray object from a Python object that exposes the __array_interface__ attribute following the array interface protocol. If the object does not contain this attribute then a borrowed reference to Py_NotImplemented is returned.

PyObject *PyArray_FromArrayAttr(PyObject *op, PyArray_Descr *dtype, PyObject *context)#: Return an ndarray object from a Python object that exposes the __array__ method. The __array__ method can take 0, or 1 argument ([dtype]). context is unused.

PyObject *PyArray_ContiguousFromAny(PyObject *op, int typenum, int min_depth, int max_depth)#: This function returns a (C-style) contiguous and behaved function array from any nested sequence or array interface exporting object, op, of (non-flexible) type given by the enumerated typenum, of minimum depth min_depth, and of maximum depth max_depth. Equivalent to a call to PyArray_FromAny with requirements set to NPY_ARRAY_DEFAULT and the type_num member of the type argument set to typenum.

PyObject *PyArray_ContiguousFromObject(PyObject *op, int typenum, int min_depth, int max_depth)#: This function returns a well-behaved C-style contiguous array from any nested sequence or array-interface exporting object. The minimum number of dimensions the array can have is given by min_depth while the maximum is max_depth. This is equivalent to call PyArray_FromAny with requirements NPY_ARRAY_DEFAULT and NPY_ARRAY_ENSUREARRAY.

PyObject *PyArray_FromObject(PyObject *op, int typenum, int min_depth, int max_depth)#: Return an aligned and in native-byteorder array from any nested sequence or array-interface exporting object, op, of a type given by the enumerated typenum. The minimum number of dimensions the array can have is given by min_depth while the maximum is max_depth. This is equivalent to a call to PyArray_FromAny with requirements set to BEHAVED.

PyObject *PyArray_EnsureArray(PyObject *op)#: This function steals a reference to op and makes sure that op is a base-class ndarray. It special cases array scalars, but otherwise calls PyArray_FromAny ( op, NULL, 0, 0, NPY_ARRAY_ENSUREARRAY, NULL).

PyObject *PyArray_FromString(char *string, npy_intp slen, PyArray_Descr *dtype, npy_intp num, char *sep)#: Construct a one-dimensional ndarray of a single type from a binary or (ASCII) text string of length slen. The data-type of the array to-be-created is given by dtype. If num is -1, then copy the entire string and return an appropriately sized array, otherwise, num is the number of items to copy from the string. If sep is NULL (or “”), then interpret the string as bytes of binary data, otherwise convert the sub-strings separated by sep to items of data-type dtype. Some data-types may not be readable in text mode and an error will be raised if that occurs. All errors return NULL.

PyObject *PyArray_FromFile(FILE *fp, PyArray_Descr *dtype, npy_intp num, char *sep)#: Construct a one-dimensional ndarray of a single type from a binary or text file. The open file pointer is fp, the data-type of the array to be created is given by dtype. This must match the data in the file. If num is -1, then read until the end of the file and return an appropriately sized array, otherwise, num is the number of items to read. If sep is NULL (or “”), then read from the file in binary mode, otherwise read from the file in text mode with sep providing the item separator. Some array types cannot be read in text mode in which case an error is raised.

PyObject *PyArray_FromBuffer(PyObject *buf, PyArray_Descr *dtype, npy_intp count, npy_intp offset)#: Construct a one-dimensional ndarray of a single type from an object, buf, that exports the (single-segment) buffer protocol (or has an attribute __buffer__ that returns an object that exports the buffer protocol). A writeable buffer will be tried first followed by a read- only buffer. The NPY_ARRAY_WRITEABLE flag of the returned array will reflect which one was successful. The data is assumed to start at offset bytes from the start of the memory location for the object. The type of the data in the buffer will be interpreted depending on the data- type descriptor, dtype. If count is negative then it will be determined from the size of the buffer and the requested itemsize, otherwise, count represents how many elements should be converted from the buffer.

int PyArray_CopyInto(PyArrayObject *dest, PyArrayObject *src)#: Copy from the source array, src, into the destination array, dest, performing a data-type conversion if necessary. If an error occurs return -1 (otherwise 0). The shape of src must be broadcastable to the shape of dest. The data areas of dest and src must not overlap.

int PyArray_CopyObject(PyArrayObject *dest, PyObject *src)#: Assign an object src to a NumPy array dest according to array-coercion rules. This is basically identical to PyArray_FromAny, but assigns directly to the output array. Returns 0 on success and -1 on failures.

int PyArray_MoveInto(PyArrayObject *dest, PyArrayObject *src)#: Move data from the source array, src, into the destination array, dest, performing a data-type conversion if necessary. If an error occurs return -1 (otherwise 0). The shape of src must be broadcastable to the shape of dest. The data areas of dest and src may overlap.

PyArrayObject *PyArray_GETCONTIGUOUS(PyObject *op)#: If op is already (C-style) contiguous and well-behaved then just return a reference, otherwise return a (contiguous and well-behaved) copy of the array. The parameter op must be a (sub-class of an) ndarray and no checking for that is done.

PyObject *PyArray_FROM_O(PyObject *obj)#: Convert obj to an ndarray. The argument can be any nested sequence or object that exports the array interface. This is a macro form of PyArray_FromAny using NULL, 0, 0, 0 for the other arguments. Your code must be able to handle any data-type descriptor and any combination of data-flags to use this macro.

PyObject *PyArray_FROM_OF(PyObject *obj, int requirements)#: Similar to PyArray_FROM_O except it can take an argument of requirements indicating properties the resulting array must have. Available requirements that can be enforced are NPY_ARRAY_C_CONTIGUOUS, NPY_ARRAY_F_CONTIGUOUS, NPY_ARRAY_ALIGNED, NPY_ARRAY_WRITEABLE, NPY_ARRAY_NOTSWAPPED, NPY_ARRAY_ENSURECOPY, NPY_ARRAY_WRITEBACKIFCOPY, NPY_ARRAY_FORCECAST, and NPY_ARRAY_ENSUREARRAY. Standard combinations of flags can also be used:

PyObject *PyArray_FROM_OT(PyObject *obj, int typenum)#: Similar to PyArray_FROM_O except it can take an argument of typenum specifying the type-number the returned array.

PyObject *PyArray_FROM_OTF(PyObject *obj, int typenum, int requirements)#: Combination of PyArray_FROM_OF and PyArray_FROM_OT allowing both a typenum and a flags argument to be provided.

PyObject *PyArray_FROMANY(PyObject *obj, int typenum, int min, int max, int requirements)#: Similar to PyArray_FromAny except the data-type is specified using a typenumber. PyArray_DescrFromType (typenum) is passed directly to PyArray_FromAny. This macro also adds NPY_ARRAY_DEFAULT to requirements if NPY_ARRAY_ENSURECOPY is passed in as requirements.

PyObject *PyArray_CheckAxis(PyObject *obj, int *axis, int requirements)#: Encapsulate the functionality of functions and methods that take the axis= keyword and work properly with None as the axis argument. The input array is obj, while *axis is a converted integer (so that >=MAXDIMS is the None value), and requirements gives the needed properties of obj. The output is a converted version of the input so that requirements are met and if needed a flattening has occurred. On output negative values of *axis are converted and the new value is checked to ensure consistency with the shape of obj.

Dealing with types#

General check of Python Type#

int PyArray_Check(PyObject *op)#: Evaluates true if op is a Python object whose type is a sub-type of PyArray_Type.

int PyArray_CheckExact(PyObject *op)#: Evaluates true if op is a Python object with type PyArray_Type.

int PyArray_HasArrayInterface(PyObject *op, PyObject *out)#: If op implements any part of the array interface, then out will contain a new reference to the newly created ndarray using the interface or out will contain NULL if an error during conversion occurs. Otherwise, out will contain a borrowed reference to Py_NotImplemented and no error condition is set.

int PyArray_HasArrayInterfaceType(PyObject *op, PyArray_Descr *dtype, PyObject *context, PyObject *out)#: If op implements any part of the array interface, then out will contain a new reference to the newly created ndarray using the interface or out will contain NULL if an error during conversion occurs. Otherwise, out will contain a borrowed reference to Py_NotImplemented and no error condition is set. This version allows setting of the dtype in the part of the array interface that looks for the __array__ attribute. context is unused.

int PyArray_IsZeroDim(PyObject *op)#: Evaluates true if op is an instance of (a subclass of) PyArray_Type and has 0 dimensions.

PyArray_IsScalar(op, cls)#: Evaluates true if op is an instance of Py{cls}ArrType_Type.

int PyArray_CheckScalar(PyObject *op)#: Evaluates true if op is either an array scalar (an instance of a sub-type of PyGenericArr_Type ), or an instance of (a sub-class of) PyArray_Type whose dimensionality is 0.

int PyArray_IsPythonNumber(PyObject *op)#: Evaluates true if op is an instance of a builtin numeric type (int, float, complex, long, bool)

int PyArray_IsPythonScalar(PyObject *op)#: Evaluates true if op is a builtin Python scalar object (int, float, complex, bytes, str, long, bool).

int PyArray_IsAnyScalar(PyObject *op)#: Evaluates true if op is either a Python scalar object (see PyArray_IsPythonScalar) or an array scalar (an instance of a sub- type of PyGenericArr_Type ).

int PyArray_CheckAnyScalar(PyObject *op)#: Evaluates true if op is a Python scalar object (see PyArray_IsPythonScalar), an array scalar (an instance of a sub-type of PyGenericArr_Type) or an instance of a sub-type of PyArray_Type whose dimensionality is 0.

Data-type checking#

For the typenum macros, the argument is an integer representing an enumerated array data type. For the array type checking macros the argument must be a PyObject* that can be directly interpreted as a PyArrayObject*.

int PyTypeNum_ISUNSIGNED(int num)#

int PyDataType_ISUNSIGNED(PyArray_Descr *descr)#

int PyArray_ISUNSIGNED(PyArrayObject *obj)#: Type represents an unsigned integer.

int PyTypeNum_ISSIGNED(int num)#

int PyDataType_ISSIGNED(PyArray_Descr *descr)#

int PyArray_ISSIGNED(PyArrayObject *obj)#: Type represents a signed integer.

int PyTypeNum_ISINTEGER(int num)#

int PyDataType_ISINTEGER(PyArray_Descr *descr)#

int PyArray_ISINTEGER(PyArrayObject *obj)#: Type represents any integer.

int PyTypeNum_ISFLOAT(int num)#

int PyDataType_ISFLOAT(PyArray_Descr *descr)#

int PyArray_ISFLOAT(PyArrayObject *obj)#: Type represents any floating point number.

int PyTypeNum_ISCOMPLEX(int num)#

int PyDataType_ISCOMPLEX(PyArray_Descr *descr)#

int PyArray_ISCOMPLEX(PyArrayObject *obj)#: Type represents any complex floating point number.

int PyTypeNum_ISNUMBER(int num)#

int PyDataType_ISNUMBER(PyArray_Descr *descr)#

int PyArray_ISNUMBER(PyArrayObject *obj)#: Type represents any integer, floating point, or complex floating point number.

int PyTypeNum_ISSTRING(int num)#

int PyDataType_ISSTRING(PyArray_Descr *descr)#

int PyArray_ISSTRING(PyArrayObject *obj)#: Type represents a string data type.

int PyTypeNum_ISPYTHON(int num)#

int PyDataType_ISPYTHON(PyArray_Descr *descr)#

int PyArray_ISPYTHON(PyArrayObject *obj)#: Type represents an enumerated type corresponding to one of the standard Python scalar (bool, int, float, or complex).

int PyTypeNum_ISFLEXIBLE(int num)#

int PyDataType_ISFLEXIBLE(PyArray_Descr *descr)#

int PyArray_ISFLEXIBLE(PyArrayObject *obj)#: Type represents one of the flexible array types ( NPY_STRING, NPY_UNICODE, or NPY_VOID ).

int PyDataType_ISUNSIZED(PyArray_Descr *descr)#

Type has no size information attached, and can be resized. Should only be called on flexible dtypes. Types that are attached to an array will always be sized, hence the array form of this macro not existing.

Changed in version 1.18.

For structured datatypes with no fields this function now returns False.

int PyTypeNum_ISUSERDEF(int num)#

int PyDataType_ISUSERDEF(PyArray_Descr *descr)#

int PyArray_ISUSERDEF(PyArrayObject *obj)#: Type represents a user-defined type.

int PyTypeNum_ISEXTENDED(int num)#

int PyDataType_ISEXTENDED(PyArray_Descr *descr)#

int PyArray_ISEXTENDED(PyArrayObject *obj)#: Type is either flexible or user-defined.

int PyTypeNum_ISOBJECT(int num)#

int PyDataType_ISOBJECT(PyArray_Descr *descr)#

int PyArray_ISOBJECT(PyArrayObject *obj)#: Type represents object data type.

int PyTypeNum_ISBOOL(int num)#

int PyDataType_ISBOOL(PyArray_Descr *descr)#

int PyArray_ISBOOL(PyArrayObject *obj)#: Type represents Boolean data type.

int PyDataType_HASFIELDS(PyArray_Descr *descr)#

int PyArray_HASFIELDS(PyArrayObject *obj)#: Type has fields associated with it.

int PyArray_ISNOTSWAPPED(PyArrayObject *m)#: Evaluates true if the data area of the ndarray m is in machine byte-order according to the array’s data-type descriptor.

int PyArray_ISBYTESWAPPED(PyArrayObject *m)#: Evaluates true if the data area of the ndarray m is not in machine byte-order according to the array’s data-type descriptor.

npy_bool PyArray_EquivTypes(PyArray_Descr *type1, PyArray_Descr *type2)#: Return NPY_TRUE if type1 and type2 actually represent equivalent types for this platform (the fortran member of each type is ignored). For example, on 32-bit platforms, NPY_LONG and NPY_INT are equivalent. Otherwise return NPY_FALSE.

npy_bool PyArray_EquivArrTypes(PyArrayObject *a1, PyArrayObject *a2)#: Return NPY_TRUE if a1 and a2 are arrays with equivalent types for this platform.

npy_bool PyArray_EquivTypenums(int typenum1, int typenum2)#: Special case of PyArray_EquivTypes (…) that does not accept flexible data types but may be easier to call.

int PyArray_EquivByteorders(int b1, int b2)#: True if byteorder characters b1 and b2 ( NPY_LITTLE, NPY_BIG, NPY_NATIVE, NPY_IGNORE ) are either equal or equivalent as to their specification of a native byte order. Thus, on a little-endian machine NPY_LITTLE and NPY_NATIVE are equivalent where they are not equivalent on a big-endian machine.

Converting data types#

PyObject *PyArray_Cast(PyArrayObject *arr, int typenum)#: Mainly for backwards compatibility to the Numeric C-API and for simple casts to non-flexible types. Return a new array object with the elements of arr cast to the data-type typenum which must be one of the enumerated types and not a flexible type.

PyObject *PyArray_CastToType(PyArrayObject *arr, PyArray_Descr *type, int fortran)#: Return a new array of the type specified, casting the elements of arr as appropriate. The fortran argument specifies the ordering of the output array.

int PyArray_CastTo(PyArrayObject *out, PyArrayObject *in)#

As of 1.6, this function simply calls PyArray_CopyInto, which handles the casting.

Cast the elements of the array in into the array out. The output array should be writeable, have an integer-multiple of the number of elements in the input array (more than one copy can be placed in out), and have a data type that is one of the builtin types. Returns 0 on success and -1 if an error occurs.

PyArray_VectorUnaryFunc *PyArray_GetCastFunc(PyArray_Descr *from, int totype)#: Return the low-level casting function to cast from the given descriptor to the builtin type number. If no casting function exists return NULL and set an error. Using this function instead of direct access to from ->f->cast will allow support of any user-defined casting functions added to a descriptors casting dictionary.

int PyArray_CanCastSafely(int fromtype, int totype)#: Returns non-zero if an array of data type fromtype can be cast to an array of data type totype without losing information. An exception is that 64-bit integers are allowed to be cast to 64-bit floating point values even though this can lose precision on large integers so as not to proliferate the use of long doubles without explicit requests. Flexible array types are not checked according to their lengths with this function.

int PyArray_CanCastTo(PyArray_Descr *fromtype, PyArray_Descr *totype)#

PyArray_CanCastTypeTo supersedes this function in NumPy 1.6 and later.

Equivalent to PyArray_CanCastTypeTo(fromtype, totype, NPY_SAFE_CASTING).

int PyArray_CanCastTypeTo(PyArray_Descr *fromtype, PyArray_Descr *totype, NPY_CASTING casting)#: New in version 1.6.

Returns non-zero if an array of data type fromtype (which can include flexible types) can be cast safely to an array of data type totype (which can include flexible types) according to the casting rule casting. For simple types with NPY_SAFE_CASTING, this is basically a wrapper around PyArray_CanCastSafely, but for flexible types such as strings or unicode, it produces results taking into account their sizes. Integer and float types can only be cast to a string or unicode type using NPY_SAFE_CASTING if the string or unicode type is big enough to hold the max value of the integer/float type being cast from.

int PyArray_CanCastArrayTo(PyArrayObject *arr, PyArray_Descr *totype, NPY_CASTING casting)#

New in version 1.6.

Returns non-zero if arr can be cast to totype according to the casting rule given in casting. If arr is an array scalar, its value is taken into account, and non-zero is also returned when the value will not overflow or be truncated to an integer when converting to a smaller type.

This is almost the same as the result of PyArray_CanCastTypeTo(PyArray_MinScalarType(arr), totype, casting), but it also handles a special case arising because the set of uint values is not a subset of the int values for types with the same number of bits.

PyArray_Descr *PyArray_MinScalarType(PyArrayObject *arr)#

New in version 1.6.

If arr is an array, returns its data type descriptor, but if arr is an array scalar (has 0 dimensions), it finds the data type of smallest size to which the value may be converted without overflow or truncation to an integer.

This function will not demote complex to float or anything to boolean, but will demote a signed integer to an unsigned integer when the scalar value is positive.

PyArray_Descr *PyArray_PromoteTypes(PyArray_Descr *type1, PyArray_Descr *type2)#: New in version 1.6.

Finds the data type of smallest size and kind to which type1 and type2 may be safely converted. This function is symmetric and associative. A string or unicode result will be the proper size for storing the max value of the input types converted to a string or unicode.

PyArray_Descr *PyArray_ResultType(npy_intp narrs, PyArrayObject **arrs, npy_intp ndtypes, PyArray_Descr **dtypes)#

New in version 1.6.

This applies type promotion to all the inputs, using the NumPy rules for combining scalars and arrays, to determine the output type of a set of operands. This is the same result type that ufuncs produce. The specific algorithm used is as follows.

Categories are determined by first checking which of boolean, integer (int/uint), or floating point (float/complex) the maximum kind of all the arrays and the scalars are.

If there are only scalars or the maximum category of the scalars is higher than the maximum category of the arrays, the data types are combined with PyArray_PromoteTypes to produce the return value.

Otherwise, PyArray_MinScalarType is called on each array, and the resulting data types are all combined with PyArray_PromoteTypes to produce the return value.

The set of int values is not a subset of the uint values for types with the same number of bits, something not reflected in PyArray_MinScalarType, but handled as a special case in PyArray_ResultType.

int PyArray_ObjectType(PyObject *op, int mintype)#

This function is superseded by PyArray_MinScalarType and/or PyArray_ResultType.

This function is useful for determining a common type that two or more arrays can be converted to. It only works for non-flexible array types as no itemsize information is passed. The mintype argument represents the minimum type acceptable, and op represents the object that will be converted to an array. The return value is the enumerated typenumber that represents the data-type that op should have.

void PyArray_ArrayType(PyObject *op, PyArray_Descr *mintype, PyArray_Descr *outtype)#

This function is superseded by PyArray_ResultType.

This function works similarly to PyArray_ObjectType (…) except it handles flexible arrays. The mintype argument can have an itemsize member and the outtype argument will have an itemsize member at least as big but perhaps bigger depending on the object op.

PyArrayObject **PyArray_ConvertToCommonType(PyObject *op, int *n)#

The functionality this provides is largely superseded by iterator NpyIter introduced in 1.6, with flag NPY_ITER_COMMON_DTYPE or with the same dtype parameter for all operands.

Convert a sequence of Python objects contained in op to an array of ndarrays each having the same data type. The type is selected in the same way as PyArray_ResultType. The length of the sequence is returned in n, and an n -length array of PyArrayObject pointers is the return value (or NULL if an error occurs). The returned array must be freed by the caller of this routine (using PyDataMem_FREE ) and all the array objects in it DECREF ‘d or a memory-leak will occur. The example template-code below shows a typically usage:

Changed in version 1.18.0: A mix of scalars and zero-dimensional arrays now produces a type capable of holding the scalar value. Previously priority was given to the dtype of the arrays.

mps = PyArray_ConvertToCommonType(obj, &n);
if (mps==NULL) return NULL;
{code}
<before return>
for (i=0; i<n; i++) Py_DECREF(mps[i]);
PyDataMem_FREE(mps);
{return}

char *PyArray_Zero(PyArrayObject *arr)#: A pointer to newly created memory of size arr ->itemsize that holds the representation of 0 for that type. The returned pointer, ret, must be freed using PyDataMem_FREE (ret) when it is not needed anymore.

char *PyArray_One(PyArrayObject *arr)#: A pointer to newly created memory of size arr ->itemsize that holds the representation of 1 for that type. The returned pointer, ret, must be freed using PyDataMem_FREE (ret) when it is not needed anymore.

int PyArray_ValidType(int typenum)#: Returns NPY_TRUE if typenum represents a valid type-number (builtin or user-defined or character code). Otherwise, this function returns NPY_FALSE.

User-defined data types#

void PyArray_InitArrFuncs(PyArray_ArrFuncs *f)#: Initialize all function pointers and members to NULL.

int PyArray_RegisterDataType(PyArray_Descr *dtype)#

Register a data-type as a new user-defined data type for arrays. The type must have most of its entries filled in. This is not always checked and errors can produce segfaults. In particular, the typeobj member of the dtype structure must be filled with a Python type that has a fixed-size element-size that corresponds to the elsize member of dtype. Also the f member must have the required functions: nonzero, copyswap, copyswapn, getitem, setitem, and cast (some of the cast functions may be NULL if no support is desired). To avoid confusion, you should choose a unique character typecode but this is not enforced and not relied on internally.

A user-defined type number is returned that uniquely identifies the type. A pointer to the new structure can then be obtained from PyArray_DescrFromType using the returned type number. A -1 is returned if an error occurs. If this dtype has already been registered (checked only by the address of the pointer), then return the previously-assigned type-number.

int PyArray_RegisterCastFunc(PyArray_Descr *descr, int totype, PyArray_VectorUnaryFunc *castfunc)#: Register a low-level casting function, castfunc, to convert from the data-type, descr, to the given data-type number, totype. Any old casting function is over-written. A 0 is returned on success or a -1 on failure.

int PyArray_RegisterCanCast(PyArray_Descr *descr, int totype, NPY_SCALARKIND scalar)#: Register the data-type number, totype, as castable from data-type object, descr, of the given scalar kind. Use scalar = NPY_NOSCALAR to register that an array of data-type descr can be cast safely to a data-type whose type_number is totype. The return value is 0 on success or -1 on failure.

int PyArray_TypeNumFromName(char const *str)#: Given a string return the type-number for the data-type with that string as the type-object name. Returns NPY_NOTYPE without setting an error if no type can be found. Only works for user-defined data-types.

Special functions for NPY_OBJECT#

Warning

When working with arrays or buffers filled with objects NumPy tries to ensure such buffers are filled with None before any data may be read. However, code paths may existed where an array is only initialized to NULL. NumPy itself accepts NULL as an alias for None, but may assert non-NULL when compiled in debug mode.

Because NumPy is not yet consistent about initialization with None, users must expect a value of NULL when working with buffers created by NumPy. Users should also ensure to pass fully initialized buffers to NumPy, since NumPy may make this a strong requirement in the future.

There is currently an intention to ensure that NumPy always initializes object arrays before they may be read. Any failure to do so will be regarded as a bug. In the future, users may be able to rely on non-NULL values when reading from any array, although exceptions for writing to freshly created arrays may remain (e.g. for output arrays in ufunc code). As of NumPy 1.23 known code paths exists where proper filling is not done.

int PyArray_INCREF(PyArrayObject *op)#: Used for an array, op, that contains any Python objects. It increments the reference count of every object in the array according to the data-type of op. A -1 is returned if an error occurs, otherwise 0 is returned.

void PyArray_Item_INCREF(char *ptr, PyArray_Descr *dtype)#: A function to INCREF all the objects at the location ptr according to the data-type dtype. If ptr is the start of a structured type with an object at any offset, then this will (recursively) increment the reference count of all object-like items in the structured type.

int PyArray_XDECREF(PyArrayObject *op)#: Used for an array, op, that contains any Python objects. It decrements the reference count of every object in the array according to the data-type of op. Normal return value is 0. A -1 is returned if an error occurs.

void PyArray_Item_XDECREF(char *ptr, PyArray_Descr *dtype)#: A function to XDECREF all the object-like items at the location ptr as recorded in the data-type, dtype. This works recursively so that if dtype itself has fields with data-types that contain object-like items, all the object-like fields will be XDECREF 'd.

void PyArray_FillObjectArray(PyArrayObject *arr, PyObject *obj)#: Fill a newly created array with a single value obj at all locations in the structure with object data-types. No checking is performed but arr must be of data-type NPY_OBJECT and be single-segment and uninitialized (no previous objects in position). Use PyArray_XDECREF (arr) if you need to decrement all the items in the object array prior to calling this function.

int PyArray_SetWritebackIfCopyBase(PyArrayObject *arr, PyArrayObject *base)#

Precondition: arr is a copy of base (though possibly with different strides, ordering, etc.) Sets the NPY_ARRAY_WRITEBACKIFCOPY flag and arr->base, and set base to READONLY. Call PyArray_ResolveWritebackIfCopy before calling Py_DECREF in order copy any changes back to base and reset the READONLY flag.

Returns 0 for success, -1 for failure.

Array flags#

The flags attribute of the PyArrayObject structure contains important information about the memory used by the array (pointed to by the data member) This flag information must be kept accurate or strange results and even segfaults may result.

There are 6 (binary) flags that describe the memory area used by the data buffer. These constants are defined in arrayobject.h and determine the bit-position of the flag. Python exposes a nice attribute- based interface as well as a dictionary-like interface for getting (and, if appropriate, setting) these flags.

Memory areas of all kinds can be pointed to by an ndarray, necessitating these flags. If you get an arbitrary PyArrayObject in C-code, you need to be aware of the flags that are set. If you need to guarantee a certain kind of array (like NPY_ARRAY_C_CONTIGUOUS and NPY_ARRAY_BEHAVED), then pass these requirements into the PyArray_FromAny function.

Basic Array Flags#

An ndarray can have a data segment that is not a simple contiguous chunk of well-behaved memory you can manipulate. It may not be aligned with word boundaries (very important on some platforms). It might have its data in a different byte-order than the machine recognizes. It might not be writeable. It might be in Fortran-contiguous order. The array flags are used to indicate what can be said about data associated with an array.

In versions 1.6 and earlier of NumPy, the following flags did not have the _ARRAY_ macro namespace in them. That form of the constant names is deprecated in 1.7.

NPY_ARRAY_C_CONTIGUOUS#: The data area is in C-style contiguous order (last index varies the fastest).

NPY_ARRAY_F_CONTIGUOUS#: The data area is in Fortran-style contiguous order (first index varies the fastest).

Note

Arrays can be both C-style and Fortran-style contiguous simultaneously. This is clear for 1-dimensional arrays, but can also be true for higher dimensional arrays.

Even for contiguous arrays a stride for a given dimension arr.strides[dim] may be arbitrary if arr.shape[dim] == 1 or the array has no elements. It does not generally hold that self.strides[-1] == self.itemsize for C-style contiguous arrays or self.strides[0] == self.itemsize for Fortran-style contiguous arrays is true. The correct way to access the itemsize of an array from the C API is PyArray_ITEMSIZE(arr).

Combinations of array flags#

NPY_ARRAY_BEHAVED#: NPY_ARRAY_ALIGNED | NPY_ARRAY_WRITEABLE

NPY_ARRAY_CARRAY#: NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_BEHAVED

NPY_ARRAY_CARRAY_RO#: NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_ALIGNED

NPY_ARRAY_FARRAY#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_BEHAVED

NPY_ARRAY_FARRAY_RO#: NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_ALIGNED

NPY_ARRAY_DEFAULT#: NPY_ARRAY_CARRAY

NPY_ARRAY_UPDATE_ALL#: NPY_ARRAY_C_CONTIGUOUS | NPY_ARRAY_F_CONTIGUOUS | NPY_ARRAY_ALIGNED

Flag-like constants#

These constants are used in PyArray_FromAny (and its macro forms) to specify desired properties of the new array.

NPY_ARRAY_FORCECAST#: Cast to the desired type, even if it can’t be done without losing information.

NPY_ARRAY_ENSURECOPY#: Make sure the resulting array is a copy of the original.

NPY_ARRAY_ENSUREARRAY#: Make sure the resulting object is an actual ndarray, and not a sub-class.

Flag checking#

For all of these macros arr must be an instance of a (subclass of) PyArray_Type.

int PyArray_CHKFLAGS(PyObject *arr, int flags)#: The first parameter, arr, must be an ndarray or subclass. The parameter, flags, should be an integer consisting of bitwise combinations of the possible flags an array can have: NPY_ARRAY_C_CONTIGUOUS, NPY_ARRAY_F_CONTIGUOUS, NPY_ARRAY_OWNDATA, NPY_ARRAY_ALIGNED, NPY_ARRAY_WRITEABLE, NPY_ARRAY_WRITEBACKIFCOPY.

int PyArray_IS_C_CONTIGUOUS(PyObject *arr)#: Evaluates true if arr is C-style contiguous.

int PyArray_IS_F_CONTIGUOUS(PyObject *arr)#: Evaluates true if arr is Fortran-style contiguous.

int PyArray_ISFORTRAN(PyObject *arr)#: Evaluates true if arr is Fortran-style contiguous and not C-style contiguous. PyArray_IS_F_CONTIGUOUS is the correct way to test for Fortran-style contiguity.

int PyArray_ISWRITEABLE(PyObject *arr)#: Evaluates true if the data area of arr can be written to

int PyArray_ISALIGNED(PyObject *arr)#: Evaluates true if the data area of arr is properly aligned on the machine.

int PyArray_ISBEHAVED(PyObject *arr)#: Evaluates true if the data area of arr is aligned and writeable and in machine byte-order according to its descriptor.

int PyArray_ISBEHAVED_RO(PyObject *arr)#: Evaluates true if the data area of arr is aligned and in machine byte-order.

int PyArray_ISCARRAY(PyObject *arr)#: Evaluates true if the data area of arr is C-style contiguous, and PyArray_ISBEHAVED (arr) is true.

int PyArray_ISFARRAY(PyObject *arr)#: Evaluates true if the data area of arr is Fortran-style contiguous and PyArray_ISBEHAVED (arr) is true.

int PyArray_ISCARRAY_RO(PyObject *arr)#: Evaluates true if the data area of arr is C-style contiguous, aligned, and in machine byte-order.

int PyArray_ISFARRAY_RO(PyObject *arr)#: Evaluates true if the data area of arr is Fortran-style contiguous, aligned, and in machine byte-order .

int PyArray_ISONESEGMENT(PyObject *arr)#: Evaluates true if the data area of arr consists of a single (C-style or Fortran-style) contiguous segment.

void PyArray_UpdateFlags(PyArrayObject *arr, int flagmask)#: The NPY_ARRAY_C_CONTIGUOUS, NPY_ARRAY_ALIGNED, and NPY_ARRAY_F_CONTIGUOUS array flags can be “calculated” from the array object itself. This routine updates one or more of these flags of arr as specified in flagmask by performing the required calculation.

Warning

It is important to keep the flags updated (using PyArray_UpdateFlags can help) whenever a manipulation with an array is performed that might cause them to change. Later calculations in NumPy that rely on the state of these flags do not repeat the calculation to update them.

int PyArray_FailUnlessWriteable(PyArrayObject *obj, const char *name)#

This function does nothing and returns 0 if obj is writeable. It raises an exception and returns -1 if obj is not writeable. It may also do other house-keeping, such as issuing warnings on arrays which are transitioning to become views. Always call this function at some point before writing to an array.

name is a name for the array, used to give better error messages. It can be something like “assignment destination”, “output array”, or even just “array”.

Array method alternative API#

Conversion#

PyObject *PyArray_GetField(PyArrayObject *self, PyArray_Descr *dtype, int offset)#: Equivalent to ndarray.getfield (self, dtype, offset). This function steals a reference to PyArray_Descr and returns a new array of the given dtype using the data in the current array at a specified offset in bytes. The offset plus the itemsize of the new array type must be less than self ->descr->elsize or an error is raised. The same shape and strides as the original array are used. Therefore, this function has the effect of returning a field from a structured array. But, it can also be used to select specific bytes or groups of bytes from any array type.

int PyArray_SetField(PyArrayObject *self, PyArray_Descr *dtype, int offset, PyObject *val)#: Equivalent to ndarray.setfield (self, val, dtype, offset ). Set the field starting at offset in bytes and of the given dtype to val. The offset plus dtype ->elsize must be less than self ->descr->elsize or an error is raised. Otherwise, the val argument is converted to an array and copied into the field pointed to. If necessary, the elements of val are repeated to fill the destination array, But, the number of elements in the destination must be an integer multiple of the number of elements in val.

PyObject *PyArray_Byteswap(PyArrayObject *self, npy_bool inplace)#: Equivalent to ndarray.byteswap (self, inplace). Return an array whose data area is byteswapped. If inplace is non-zero, then do the byteswap inplace and return a reference to self. Otherwise, create a byteswapped copy and leave self unchanged.

PyObject *PyArray_NewCopy(PyArrayObject *old, NPY_ORDER order)#: Equivalent to ndarray.copy (self, fortran). Make a copy of the old array. The returned array is always aligned and writeable with data interpreted the same as the old array. If order is NPY_CORDER, then a C-style contiguous array is returned. If order is NPY_FORTRANORDER, then a Fortran-style contiguous array is returned. If order is NPY_ANYORDER, then the array returned is Fortran-style contiguous only if the old one is; otherwise, it is C-style contiguous.

PyObject *PyArray_ToList(PyArrayObject *self)#: Equivalent to ndarray.tolist (self). Return a nested Python list from self.

PyObject *PyArray_ToString(PyArrayObject *self, NPY_ORDER order)#: Equivalent to ndarray.tobytes (self, order). Return the bytes of this array in a Python string.

PyObject *PyArray_ToFile(PyArrayObject *self, FILE *fp, char *sep, char *format)#: Write the contents of self to the file pointer fp in C-style contiguous fashion. Write the data as binary bytes if sep is the string “”or NULL. Otherwise, write the contents of self as text using the sep string as the item separator. Each item will be printed to the file. If the format string is not NULL or “”, then it is a Python print statement format string showing how the items are to be written.

int PyArray_Dump(PyObject *self, PyObject *file, int protocol)#: Pickle the object in self to the given file (either a string or a Python file object). If file is a Python string it is considered to be the name of a file which is then opened in binary mode. The given protocol is used (if protocol is negative, or the highest available is used). This is a simple wrapper around cPickle.dump(self, file, protocol).

PyObject *PyArray_Dumps(PyObject *self, int protocol)#: Pickle the object in self to a Python string and return it. Use the Pickle protocol provided (or the highest available if protocol is negative).

int PyArray_FillWithScalar(PyArrayObject *arr, PyObject *obj)#: Fill the array, arr, with the given scalar object, obj. The object is first converted to the data type of arr, and then copied into every location. A -1 is returned if an error occurs, otherwise 0 is returned.

PyObject *PyArray_View(PyArrayObject *self, PyArray_Descr *dtype, PyTypeObject *ptype)#

Equivalent to ndarray.view (self, dtype). Return a new view of the array self as possibly a different data-type, dtype, and different array subclass ptype.

If dtype is NULL, then the returned array will have the same data type as self. The new data-type must be consistent with the size of self. Either the itemsizes must be identical, or self must be single-segment and the total number of bytes must be the same. In the latter case the dimensions of the returned array will be altered in the last (or first for Fortran-style contiguous arrays) dimension. The data area of the returned array and self is exactly the same.

Shape Manipulation#

PyObject *PyArray_Newshape(PyArrayObject *self, PyArray_Dims *newshape, NPY_ORDER order)#: Result will be a new array (pointing to the same memory location as self if possible), but having a shape given by newshape. If the new shape is not compatible with the strides of self, then a copy of the array with the new specified shape will be returned.

PyObject *PyArray_Reshape(PyArrayObject *self, PyObject *shape)#: Equivalent to ndarray.reshape (self, shape) where shape is a sequence. Converts shape to a PyArray_Dims structure and calls PyArray_Newshape internally. For back-ward compatibility – Not recommended

PyObject *PyArray_Squeeze(PyArrayObject *self)#: Equivalent to ndarray.squeeze (self). Return a new view of self with all of the dimensions of length 1 removed from the shape.

Warning

matrix objects are always 2-dimensional. Therefore, PyArray_Squeeze has no effect on arrays of matrix sub-class.

PyObject *PyArray_SwapAxes(PyArrayObject *self, int a1, int a2)#: Equivalent to ndarray.swapaxes (self, a1, a2). The returned array is a new view of the data in self with the given axes, a1 and a2, swapped.

PyObject *PyArray_Resize(PyArrayObject *self, PyArray_Dims *newshape, int refcheck, NPY_ORDER fortran)#: Equivalent to ndarray.resize (self, newshape, refcheck = refcheck, order= fortran ). This function only works on single-segment arrays. It changes the shape of self inplace and will reallocate the memory for self if newshape has a different total number of elements then the old shape. If reallocation is necessary, then self must own its data, have self - >base==NULL, have self - >weakrefs==NULL, and (unless refcheck is 0) not be referenced by any other array. The fortran argument can be NPY_ANYORDER, NPY_CORDER, or NPY_FORTRANORDER. It currently has no effect. Eventually it could be used to determine how the resize operation should view the data when constructing a differently-dimensioned array. Returns None on success and NULL on error.

PyObject *PyArray_Transpose(PyArrayObject *self, PyArray_Dims *permute)#: Equivalent to ndarray.transpose (self, permute). Permute the axes of the ndarray object self according to the data structure permute and return the result. If permute is NULL, then the resulting array has its axes reversed. For example if self has shape \(10\times20\times30\), and permute .ptr is (0,2,1) the shape of the result is \(10\times30\times20.\) If permute is NULL, the shape of the result is \(30\times20\times10.\)

PyObject *PyArray_Flatten(PyArrayObject *self, NPY_ORDER order)#: Equivalent to ndarray.flatten (self, order). Return a 1-d copy of the array. If order is NPY_FORTRANORDER the elements are scanned out in Fortran order (first-dimension varies the fastest). If order is NPY_CORDER, the elements of self are scanned in C-order (last dimension varies the fastest). If order NPY_ANYORDER, then the result of PyArray_ISFORTRAN (self) is used to determine which order to flatten.

PyObject *PyArray_Ravel(PyArrayObject *self, NPY_ORDER order)#: Equivalent to self.ravel(order). Same basic functionality as PyArray_Flatten (self, order) except if order is 0 and self is C-style contiguous, the shape is altered but no copy is performed.

Item selection and manipulation#

PyObject *PyArray_TakeFrom(PyArrayObject *self, PyObject *indices, int axis, PyArrayObject *ret, NPY_CLIPMODE clipmode)#: Equivalent to ndarray.take (self, indices, axis, ret, clipmode) except axis =None in Python is obtained by setting axis = NPY_MAXDIMS in C. Extract the items from self indicated by the integer-valued indices along the given axis. The clipmode argument can be NPY_RAISE, NPY_WRAP, or NPY_CLIP to indicate what to do with out-of-bound indices. The ret argument can specify an output array rather than having one created internally.

PyObject *PyArray_PutTo(PyArrayObject *self, PyObject *values, PyObject *indices, NPY_CLIPMODE clipmode)#: Equivalent to self.put(values, indices, clipmode ). Put values into self at the corresponding (flattened) indices. If values is too small it will be repeated as necessary.

PyObject *PyArray_PutMask(PyArrayObject *self, PyObject *values, PyObject *mask)#: Place the values in self wherever corresponding positions (using a flattened context) in mask are true. The mask and self arrays must have the same total number of elements. If values is too small, it will be repeated as necessary.

PyObject *PyArray_Repeat(PyArrayObject *self, PyObject *op, int axis)#: Equivalent to ndarray.repeat (self, op, axis). Copy the elements of self, op times along the given axis. Either op is a scalar integer or a sequence of length self ->dimensions[ axis ] indicating how many times to repeat each item along the axis.

PyObject *PyArray_Choose(PyArrayObject *self, PyObject *op, PyArrayObject *ret, NPY_CLIPMODE clipmode)#

Equivalent to ndarray.choose (self, op, ret, clipmode). Create a new array by selecting elements from the sequence of arrays in op based on the integer values in self. The arrays must all be broadcastable to the same shape and the entries in self should be between 0 and len(op). The output is placed in ret unless it is NULL in which case a new output is created. The clipmode argument determines behavior for when entries in self are not between 0 and len(op).

NPY_RAISE#: raise a ValueError;

NPY_WRAP#: wrap values < 0 by adding len(op) and values >=len(op) by subtracting len(op) until they are in range;

NPY_CLIP#: all values are clipped to the region [0, len(op) ).

PyObject *PyArray_Sort(PyArrayObject *self, int axis, NPY_SORTKIND kind)#: Equivalent to ndarray.sort (self, axis, kind). Return an array with the items of self sorted along axis. The array is sorted using the algorithm denoted by kind, which is an integer/enum pointing to the type of sorting algorithms used.

PyObject *PyArray_ArgSort(PyArrayObject *self, int axis)#: Equivalent to ndarray.argsort (self, axis). Return an array of indices such that selection of these indices along the given axis would return a sorted version of self. If self ->descr is a data-type with fields defined, then self->descr->names is used to determine the sort order. A comparison where the first field is equal will use the second field and so on. To alter the sort order of a structured array, create a new data-type with a different order of names and construct a view of the array with that new data-type.

PyObject *PyArray_LexSort(PyObject *sort_keys, int axis)#

Given a sequence of arrays (sort_keys) of the same shape, return an array of indices (similar to PyArray_ArgSort (…)) that would sort the arrays lexicographically. A lexicographic sort specifies that when two keys are found to be equal, the order is based on comparison of subsequent keys. A merge sort (which leaves equal entries unmoved) is required to be defined for the types. The sort is accomplished by sorting the indices first using the first sort_key and then using the second sort_key and so forth. This is equivalent to the lexsort(sort_keys, axis) Python command. Because of the way the merge-sort works, be sure to understand the order the sort_keys must be in (reversed from the order you would use when comparing two elements).

If these arrays are all collected in a structured array, then PyArray_Sort (…) can also be used to sort the array directly.

PyObject *PyArray_SearchSorted(PyArrayObject *self, PyObject *values, NPY_SEARCHSIDE side, PyObject *perm)#

Equivalent to ndarray.searchsorted (self, values, side, perm). Assuming self is a 1-d array in ascending order, then the output is an array of indices the same shape as values such that, if the elements in values were inserted before the indices, the order of self would be preserved. No checking is done on whether or not self is in ascending order.

The side argument indicates whether the index returned should be that of the first suitable location (if NPY_SEARCHLEFT) or of the last (if NPY_SEARCHRIGHT).

The sorter argument, if not NULL, must be a 1D array of integer indices the same length as self, that sorts it into ascending order. This is typically the result of a call to PyArray_ArgSort (…) Binary search is used to find the required insertion points.

int PyArray_Partition(PyArrayObject *self, PyArrayObject *ktharray, int axis, NPY_SELECTKIND which)#: Equivalent to ndarray.partition (self, ktharray, axis, kind). Partitions the array so that the values of the element indexed by ktharray are in the positions they would be if the array is fully sorted and places all elements smaller than the kth before and all elements equal or greater after the kth element. The ordering of all elements within the partitions is undefined. If self->descr is a data-type with fields defined, then self->descr->names is used to determine the sort order. A comparison where the first field is equal will use the second field and so on. To alter the sort order of a structured array, create a new data-type with a different order of names and construct a view of the array with that new data-type. Returns zero on success and -1 on failure.

PyObject *PyArray_ArgPartition(PyArrayObject *op, PyArrayObject *ktharray, int axis, NPY_SELECTKIND which)#: Equivalent to ndarray.argpartition (self, ktharray, axis, kind). Return an array of indices such that selection of these indices along the given axis would return a partitioned version of self.

PyObject *PyArray_Diagonal(PyArrayObject *self, int offset, int axis1, int axis2)#: Equivalent to ndarray.diagonal (self, offset, axis1, axis2 ). Return the offset diagonals of the 2-d arrays defined by axis1 and axis2.

npy_intp PyArray_CountNonzero(PyArrayObject *self)#: New in version 1.6.

Counts the number of non-zero elements in the array object self.

PyObject *PyArray_Nonzero(PyArrayObject *self)#: Equivalent to ndarray.nonzero (self). Returns a tuple of index arrays that select elements of self that are nonzero. If (nd= PyArray_NDIM ( self ))==1, then a single index array is returned. The index arrays have data type NPY_INTP. If a tuple is returned (nd \(\neq\) 1), then its length is nd.

PyObject *PyArray_Compress(PyArrayObject *self, PyObject *condition, int axis, PyArrayObject *out)#: Equivalent to ndarray.compress (self, condition, axis ). Return the elements along axis corresponding to elements of condition that are true.

Calculation#

Tip

Pass in NPY_MAXDIMS for axis in order to achieve the same effect that is obtained by passing in axis=None in Python (treating the array as a 1-d array).

Note

The out argument specifies where to place the result. If out is NULL, then the output array is created, otherwise the output is placed in out which must be the correct size and type. A new reference to the output array is always returned even when out is not NULL. The caller of the routine has the responsibility to Py_DECREF out if not NULL or a memory-leak will occur.

PyObject *PyArray_ArgMax(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.argmax (self, axis). Return the index of the largest element of self along axis.

PyObject *PyArray_ArgMin(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.argmin (self, axis). Return the index of the smallest element of self along axis.

PyObject *PyArray_Max(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.max (self, axis). Returns the largest element of self along the given axis. When the result is a single element, returns a numpy scalar instead of an ndarray.

PyObject *PyArray_Min(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.min (self, axis). Return the smallest element of self along the given axis. When the result is a single element, returns a numpy scalar instead of an ndarray.

PyObject *PyArray_Ptp(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.ptp (self, axis). Return the difference between the largest element of self along axis and the smallest element of self along axis. When the result is a single element, returns a numpy scalar instead of an ndarray.

Note

The rtype argument specifies the data-type the reduction should take place over. This is important if the data-type of the array is not “large” enough to handle the output. By default, all integer data-types are made at least as large as NPY_LONG for the “add” and “multiply” ufuncs (which form the basis for mean, sum, cumsum, prod, and cumprod functions).

PyObject *PyArray_Mean(PyArrayObject *self, int axis, int rtype, PyArrayObject *out)#: Equivalent to ndarray.mean (self, axis, rtype). Returns the mean of the elements along the given axis, using the enumerated type rtype as the data type to sum in. Default sum behavior is obtained using NPY_NOTYPE for rtype.

PyObject *PyArray_Trace(PyArrayObject *self, int offset, int axis1, int axis2, int rtype, PyArrayObject *out)#: Equivalent to ndarray.trace (self, offset, axis1, axis2, rtype). Return the sum (using rtype as the data type of summation) over the offset diagonal elements of the 2-d arrays defined by axis1 and axis2 variables. A positive offset chooses diagonals above the main diagonal. A negative offset selects diagonals below the main diagonal.

PyObject *PyArray_Clip(PyArrayObject *self, PyObject *min, PyObject *max)#: Equivalent to ndarray.clip (self, min, max). Clip an array, self, so that values larger than max are fixed to max and values less than min are fixed to min.

PyObject *PyArray_Conjugate(PyArrayObject *self)#: Equivalent to ndarray.conjugate (self). Return the complex conjugate of self. If self is not of complex data type, then return self with a reference.

PyObject *PyArray_Round(PyArrayObject *self, int decimals, PyArrayObject *out)#: Equivalent to ndarray.round (self, decimals, out). Returns the array with elements rounded to the nearest decimal place. The decimal place is defined as the \(10^{-\textrm{decimals}}\) digit so that negative decimals cause rounding to the nearest 10’s, 100’s, etc. If out is NULL, then the output array is created, otherwise the output is placed in out which must be the correct size and type.

PyObject *PyArray_Std(PyArrayObject *self, int axis, int rtype, PyArrayObject *out)#: Equivalent to ndarray.std (self, axis, rtype). Return the standard deviation using data along axis converted to data type rtype.

PyObject *PyArray_Sum(PyArrayObject *self, int axis, int rtype, PyArrayObject *out)#: Equivalent to ndarray.sum (self, axis, rtype). Return 1-d vector sums of elements in self along axis. Perform the sum after converting data to data type rtype.

PyObject *PyArray_CumSum(PyArrayObject *self, int axis, int rtype, PyArrayObject *out)#: Equivalent to ndarray.cumsum (self, axis, rtype). Return cumulative 1-d sums of elements in self along axis. Perform the sum after converting data to data type rtype.

PyObject *PyArray_Prod(PyArrayObject *self, int axis, int rtype, PyArrayObject *out)#: Equivalent to ndarray.prod (self, axis, rtype). Return 1-d products of elements in self along axis. Perform the product after converting data to data type rtype.

PyObject *PyArray_CumProd(PyArrayObject *self, int axis, int rtype, PyArrayObject *out)#: Equivalent to ndarray.cumprod (self, axis, rtype). Return 1-d cumulative products of elements in self along axis. Perform the product after converting data to data type rtype.

PyObject *PyArray_All(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.all (self, axis). Return an array with True elements for every 1-d sub-array of self defined by axis in which all the elements are True.

PyObject *PyArray_Any(PyArrayObject *self, int axis, PyArrayObject *out)#: Equivalent to ndarray.any (self, axis). Return an array with True elements for every 1-d sub-array of self defined by axis in which any of the elements are True.

Functions#

Array Functions#

int PyArray_AsCArray(PyObject **op, void *ptr, npy_intp *dims, int nd, PyArray_Descr *typedescr)#

Sometimes it is useful to access a multidimensional array as a C-style multi-dimensional array so that algorithms can be implemented using C’s a[i][j][k] syntax. This routine returns a pointer, ptr, that simulates this kind of C-style array, for 1-, 2-, and 3-d ndarrays.

Parameters:

op – The address to any Python object. This Python object will be replaced with an equivalent well-behaved, C-style contiguous, ndarray of the given data type specified by the last two arguments. Be sure that stealing a reference in this way to the input object is justified.
ptr – The address to a (ctype* for 1-d, ctype** for 2-d or ctype*** for 3-d) variable where ctype is the equivalent C-type for the data type. On return, ptr will be addressable as a 1-d, 2-d, or 3-d array.
dims – An output array that contains the shape of the array object. This array gives boundaries on any looping that will take place.
nd – The dimensionality of the array (1, 2, or 3).
typedescr – A PyArray_Descr structure indicating the desired data-type (including required byteorder). The call will steal a reference to the parameter.

Note

The simulation of a C-style array is not complete for 2-d and 3-d arrays. For example, the simulated arrays of pointers cannot be passed to subroutines expecting specific, statically-defined 2-d and 3-d arrays. To pass to functions requiring those kind of inputs, you must statically define the required array and copy data.

int PyArray_Free(PyObject *op, void *ptr)#: Must be called with the same objects and memory locations returned from PyArray_AsCArray (…). This function cleans up memory that otherwise would get leaked.

PyObject *PyArray_Concatenate(PyObject *obj, int axis)#: Join the sequence of objects in obj together along axis into a single array. If the dimensions or types are not compatible an error is raised.

PyObject *PyArray_InnerProduct(PyObject *obj1, PyObject *obj2)#: Compute a product-sum over the last dimensions of obj1 and obj2. Neither array is conjugated.

PyObject *PyArray_MatrixProduct(PyObject *obj1, PyObject *obj)#: Compute a product-sum over the last dimension of obj1 and the second-to-last dimension of obj2. For 2-d arrays this is a matrix-product. Neither array is conjugated.

PyObject *PyArray_MatrixProduct2(PyObject *obj1, PyObject *obj, PyArrayObject *out)#: New in version 1.6.

Same as PyArray_MatrixProduct, but store the result in out. The output array must have the correct shape, type, and be C-contiguous, or an exception is raised.

PyObject *PyArray_EinsteinSum(char *subscripts, npy_intp nop, PyArrayObject **op_in, PyArray_Descr *dtype, NPY_ORDER order, NPY_CASTING casting, PyArrayObject *out)#

New in version 1.6.

Applies the Einstein summation convention to the array operands provided, returning a new array or placing the result in out. The string in subscripts is a comma separated list of index letters. The number of operands is in nop, and op_in is an array containing those operands. The data type of the output can be forced with dtype, the output order can be forced with order (NPY_KEEPORDER is recommended), and when dtype is specified, casting indicates how permissive the data conversion should be.

See the einsum function for more details.

PyObject *PyArray_CopyAndTranspose(PyObject *op)#: A specialized copy and transpose function that works only for 2-d arrays. The returned array is a transposed copy of op.

PyObject *PyArray_Correlate(PyObject *op1, PyObject *op2, int mode)#

Compute the 1-d correlation of the 1-d arrays op1 and op2 . The correlation is computed at each output point by multiplying op1 by a shifted version of op2 and summing the result. As a result of the shift, needed values outside of the defined range of op1 and op2 are interpreted as zero. The mode determines how many shifts to return: 0 - return only shifts that did not need to assume zero- values; 1 - return an object that is the same size as op1, 2 - return all possible shifts (any overlap at all is accepted).

Notes

This does not compute the usual correlation: if op2 is larger than op1, the arguments are swapped, and the conjugate is never taken for complex arrays. See PyArray_Correlate2 for the usual signal processing correlation.

PyObject *PyArray_Correlate2(PyObject *op1, PyObject *op2, int mode)#

Updated version of PyArray_Correlate, which uses the usual definition of correlation for 1d arrays. The correlation is computed at each output point by multiplying op1 by a shifted version of op2 and summing the result. As a result of the shift, needed values outside of the defined range of op1 and op2 are interpreted as zero. The mode determines how many shifts to return: 0 - return only shifts that did not need to assume zero- values; 1 - return an object that is the same size as op1, 2 - return all possible shifts (any overlap at all is accepted).

Notes

Compute z as follows:

z[k] = sum_n op1[n] * conj(op2[n+k])

PyObject *PyArray_Where(PyObject *condition, PyObject *x, PyObject *y)#: If both x and y are NULL, then return PyArray_Nonzero (condition). Otherwise, both x and y must be given and the object returned is shaped like condition and has elements of x and y where condition is respectively True or False.

Other functions#

npy_bool PyArray_CheckStrides(int elsize, int nd, npy_intp numbytes, npy_intp const *dims, npy_intp const *newstrides)#: Determine if newstrides is a strides array consistent with the memory of an nd -dimensional array with shape dims and element-size, elsize. The newstrides array is checked to see if jumping by the provided number of bytes in each direction will ever mean jumping more than numbytes which is the assumed size of the available memory segment. If numbytes is 0, then an equivalent numbytes is computed assuming nd, dims, and elsize refer to a single-segment array. Return NPY_TRUE if newstrides is acceptable, otherwise return NPY_FALSE.

npy_intp PyArray_MultiplyList(npy_intp const *seq, int n)#

int PyArray_MultiplyIntList(int const *seq, int n)#: Both of these routines multiply an n -length array, seq, of integers and return the result. No overflow checking is performed.

int PyArray_CompareLists(npy_intp const *l1, npy_intp const *l2, int n)#: Given two n -length arrays of integers, l1, and l2, return 1 if the lists are identical; otherwise, return 0.

Auxiliary Data With Object Semantics#

New in version 1.7.0.

type NpyAuxData#

When working with more complex dtypes which are composed of other dtypes, such as the struct dtype, creating inner loops that manipulate the dtypes requires carrying along additional data. NumPy supports this idea through a struct NpyAuxData, mandating a few conventions so that it is possible to do this.

Defining an NpyAuxData is similar to defining a class in C++, but the object semantics have to be tracked manually since the API is in C. Here’s an example for a function which doubles up an element using an element copier function as a primitive.

typedef struct {
    NpyAuxData base;
    ElementCopier_Func *func;
    NpyAuxData *funcdata;
} eldoubler_aux_data;

void free_element_doubler_aux_data(NpyAuxData *data)
{
    eldoubler_aux_data *d = (eldoubler_aux_data *)data;
    /* Free the memory owned by this auxdata */
    NPY_AUXDATA_FREE(d->funcdata);
    PyArray_free(d);
}

NpyAuxData *clone_element_doubler_aux_data(NpyAuxData *data)
{
    eldoubler_aux_data *ret = PyArray_malloc(sizeof(eldoubler_aux_data));
    if (ret == NULL) {
        return NULL;
    }

    /* Raw copy of all data */
    memcpy(ret, data, sizeof(eldoubler_aux_data));

    /* Fix up the owned auxdata so we have our own copy */
    ret->funcdata = NPY_AUXDATA_CLONE(ret->funcdata);
    if (ret->funcdata == NULL) {
        PyArray_free(ret);
        return NULL;
    }

    return (NpyAuxData *)ret;
}

NpyAuxData *create_element_doubler_aux_data(
                            ElementCopier_Func *func,
                            NpyAuxData *funcdata)
{
    eldoubler_aux_data *ret = PyArray_malloc(sizeof(eldoubler_aux_data));
    if (ret == NULL) {
        PyErr_NoMemory();
        return NULL;
    }
    memset(&ret, 0, sizeof(eldoubler_aux_data));
    ret->base->free = &free_element_doubler_aux_data;
    ret->base->clone = &clone_element_doubler_aux_data;
    ret->func = func;
    ret->funcdata = funcdata;

    return (NpyAuxData *)ret;
}

type NpyAuxData_FreeFunc#: The function pointer type for NpyAuxData free functions.

type NpyAuxData_CloneFunc#: The function pointer type for NpyAuxData clone functions. These functions should never set the Python exception on error, because they may be called from a multi-threaded context.

void NPY_AUXDATA_FREE(NpyAuxData *auxdata)#: A macro which calls the auxdata’s free function appropriately, does nothing if auxdata is NULL.

NpyAuxData *NPY_AUXDATA_CLONE(NpyAuxData *auxdata)#: A macro which calls the auxdata’s clone function appropriately, returning a deep copy of the auxiliary data.

Array Iterators#

As of NumPy 1.6.0, these array iterators are superseded by the new array iterator, NpyIter.

An array iterator is a simple way to access the elements of an N-dimensional array quickly and efficiently. Section 2 provides more description and examples of this useful approach to looping over an array.

PyObject *PyArray_IterNew(PyObject *arr)#: Return an array iterator object from the array, arr. This is equivalent to arr. flat. The array iterator object makes it easy to loop over an N-dimensional non-contiguous array in C-style contiguous fashion.

PyObject *PyArray_IterAllButAxis(PyObject *arr, int *axis)#: Return an array iterator that will iterate over all axes but the one provided in *axis. The returned iterator cannot be used with PyArray_ITER_GOTO1D. This iterator could be used to write something similar to what ufuncs do wherein the loop over the largest axis is done by a separate sub-routine. If *axis is negative then *axis will be set to the axis having the smallest stride and that axis will be used.

PyObject *PyArray_BroadcastToShape(PyObject *arr, npy_intp const *dimensions, int nd)#: Return an array iterator that is broadcast to iterate as an array of the shape provided by dimensions and nd.

int PyArrayIter_Check(PyObject *op)#: Evaluates true if op is an array iterator (or instance of a subclass of the array iterator type).

void PyArray_ITER_RESET(PyObject *iterator)#: Reset an iterator to the beginning of the array.

void PyArray_ITER_NEXT(PyObject *iterator)#: Incremement the index and the dataptr members of the iterator to point to the next element of the array. If the array is not (C-style) contiguous, also increment the N-dimensional coordinates array.

void *PyArray_ITER_DATA(PyObject *iterator)#: A pointer to the current element of the array.

void PyArray_ITER_GOTO(PyObject *iterator, npy_intp *destination)#: Set the iterator index, dataptr, and coordinates members to the location in the array indicated by the N-dimensional c-array, destination, which must have size at least iterator ->nd_m1+1.

void PyArray_ITER_GOTO1D(PyObject *iterator, npy_intp index)#: Set the iterator index and dataptr to the location in the array indicated by the integer index which points to an element in the C-styled flattened array.

int PyArray_ITER_NOTDONE(PyObject *iterator)#: Evaluates TRUE as long as the iterator has not looped through all of the elements, otherwise it evaluates FALSE.

Broadcasting (multi-iterators)#

PyObject *PyArray_MultiIterNew(int num, ...)#: A simplified interface to broadcasting. This function takes the number of arrays to broadcast and then num extra ( PyObject * ) arguments. These arguments are converted to arrays and iterators are created. PyArray_Broadcast is then called on the resulting multi-iterator object. The resulting, broadcasted mult-iterator object is then returned. A broadcasted operation can then be performed using a single loop and using PyArray_MultiIter_NEXT (..)

void PyArray_MultiIter_RESET(PyObject *multi)#: Reset all the iterators to the beginning in a multi-iterator object, multi.

void PyArray_MultiIter_NEXT(PyObject *multi)#: Advance each iterator in a multi-iterator object, multi, to its next (broadcasted) element.

void *PyArray_MultiIter_DATA(PyObject *multi, int i)#: Return the data-pointer of the i \(^{\textrm{th}}\) iterator in a multi-iterator object.

void PyArray_MultiIter_NEXTi(PyObject *multi, int i)#: Advance the pointer of only the i \(^{\textrm{th}}\) iterator.

void PyArray_MultiIter_GOTO(PyObject *multi, npy_intp *destination)#: Advance each iterator in a multi-iterator object, multi, to the given \(N\) -dimensional destination where \(N\) is the number of dimensions in the broadcasted array.

void PyArray_MultiIter_GOTO1D(PyObject *multi, npy_intp index)#: Advance each iterator in a multi-iterator object, multi, to the corresponding location of the index into the flattened broadcasted array.

int PyArray_MultiIter_NOTDONE(PyObject *multi)#: Evaluates TRUE as long as the multi-iterator has not looped through all of the elements (of the broadcasted result), otherwise it evaluates FALSE.

int PyArray_Broadcast(PyArrayMultiIterObject *mit)#: This function encapsulates the broadcasting rules. The mit container should already contain iterators for all the arrays that need to be broadcast. On return, these iterators will be adjusted so that iteration over each simultaneously will accomplish the broadcasting. A negative number is returned if an error occurs.

int PyArray_RemoveSmallest(PyArrayMultiIterObject *mit)#: This function takes a multi-iterator object that has been previously “broadcasted,” finds the dimension with the smallest “sum of strides” in the broadcasted result and adapts all the iterators so as not to iterate over that dimension (by effectively making them of length-1 in that dimension). The corresponding dimension is returned unless mit ->nd is 0, then -1 is returned. This function is useful for constructing ufunc-like routines that broadcast their inputs correctly and then call a strided 1-d version of the routine as the inner-loop. This 1-d version is usually optimized for speed and for this reason the loop should be performed over the axis that won’t require large stride jumps.

Neighborhood iterator#

New in version 1.4.0.

Neighborhood iterators are subclasses of the iterator object, and can be used to iter over a neighborhood of a point. For example, you may want to iterate over every voxel of a 3d image, and for every such voxel, iterate over an hypercube. Neighborhood iterator automatically handle boundaries, thus making this kind of code much easier to write than manual boundaries handling, at the cost of a slight overhead.

PyObject *PyArray_NeighborhoodIterNew(PyArrayIterObject *iter, npy_intp bounds, int mode, PyArrayObject *fill_value)#

This function creates a new neighborhood iterator from an existing iterator. The neighborhood will be computed relatively to the position currently pointed by iter, the bounds define the shape of the neighborhood iterator, and the mode argument the boundaries handling mode.

The bounds argument is expected to be a (2 * iter->ao->nd) arrays, such as the range bound[2*i]->bounds[2*i+1] defines the range where to walk for dimension i (both bounds are included in the walked coordinates). The bounds should be ordered for each dimension (bounds[2*i] <= bounds[2*i+1]).

The mode should be one of:

NPY_NEIGHBORHOOD_ITER_ZERO_PADDING#: Zero padding. Outside bounds values will be 0.

NPY_NEIGHBORHOOD_ITER_ONE_PADDING#: One padding, Outside bounds values will be 1.

NPY_NEIGHBORHOOD_ITER_CONSTANT_PADDING#: Constant padding. Outside bounds values will be the same as the first item in fill_value.

NPY_NEIGHBORHOOD_ITER_MIRROR_PADDING#: Mirror padding. Outside bounds values will be as if the array items were mirrored. For example, for the array [1, 2, 3, 4], x[-2] will be 2, x[-2] will be 1, x[4] will be 4, x[5] will be 1, etc…

NPY_NEIGHBORHOOD_ITER_CIRCULAR_PADDING#: Circular padding. Outside bounds values will be as if the array was repeated. For example, for the array [1, 2, 3, 4], x[-2] will be 3, x[-2] will be 4, x[4] will be 1, x[5] will be 2, etc…

If the mode is constant filling (NPY_NEIGHBORHOOD_ITER_CONSTANT_PADDING), fill_value should point to an array object which holds the filling value (the first item will be the filling value if the array contains more than one item). For other cases, fill_value may be NULL.

The iterator holds a reference to iter
Return NULL on failure (in which case the reference count of iter is not changed)
iter itself can be a Neighborhood iterator: this can be useful for .e.g automatic boundaries handling
the object returned by this function should be safe to use as a normal iterator
If the position of iter is changed, any subsequent call to PyArrayNeighborhoodIter_Next is undefined behavior, and PyArrayNeighborhoodIter_Reset must be called.
If the position of iter is not the beginning of the data and the underlying data for iter is contiguous, the iterator will point to the start of the data instead of position pointed by iter. To avoid this situation, iter should be moved to the required position only after the creation of iterator, and PyArrayNeighborhoodIter_Reset must be called.

PyArrayIterObject *iter;
PyArrayNeighborhoodIterObject *neigh_iter;
iter = PyArray_IterNew(x);

/*For a 3x3 kernel */
bounds = {-1, 1, -1, 1};
neigh_iter = (PyArrayNeighborhoodIterObject*)PyArray_NeighborhoodIterNew(
     iter, bounds, NPY_NEIGHBORHOOD_ITER_ZERO_PADDING, NULL);

for(i = 0; i < iter->size; ++i) {
     for (j = 0; j < neigh_iter->size; ++j) {
             /* Walk around the item currently pointed by iter->dataptr */
             PyArrayNeighborhoodIter_Next(neigh_iter);
     }

     /* Move to the next point of iter */
     PyArrayIter_Next(iter);
     PyArrayNeighborhoodIter_Reset(neigh_iter);
}

int PyArrayNeighborhoodIter_Reset(PyArrayNeighborhoodIterObject *iter)#: Reset the iterator position to the first point of the neighborhood. This should be called whenever the iter argument given at PyArray_NeighborhoodIterObject is changed (see example)

int PyArrayNeighborhoodIter_Next(PyArrayNeighborhoodIterObject *iter)#: After this call, iter->dataptr points to the next point of the neighborhood. Calling this function after every point of the neighborhood has been visited is undefined.

Array mapping#

Array mapping is the machinery behind advanced indexing.

PyObject *PyArray_MapIterArray(PyArrayObject *a, PyObject *index)#: Use advanced indexing to iterate an array.

void PyArray_MapIterSwapAxes(PyArrayMapIterObject *mit, PyArrayObject **ret, int getmap)#: Swap the axes to or from their inserted form. MapIter always puts the advanced (array) indices first in the iteration. But if they are consecutive, it will insert/transpose them back before returning. This is stored as mit->consec != 0 (the place where they are inserted). For assignments, the opposite happens: the values to be assigned are transposed (getmap=1 instead of getmap=0). getmap=0 and getmap=1 undo the other operation.

void PyArray_MapIterNext(PyArrayMapIterObject *mit)#

This function needs to update the state of the map iterator and point mit->dataptr to the memory-location of the next object.

Note that this function never handles an extra operand but provides compatibility for an old (exposed) API.

PyObject *PyArray_MapIterArrayCopyIfOverlap(PyArrayObject *a, PyObject *index, int copy_if_overlap, PyArrayObject *extra_op)#: Similar to PyArray_MapIterArray but with an additional copy_if_overlap argument. If copy_if_overlap != 0, checks if a has memory overlap with any of the arrays in index and with extra_op, and make copies as appropriate to avoid problems if the input is modified during the iteration. iter->array may contain a copied array (WRITEBACKIFCOPY set).

Array Scalars#

PyObject *PyArray_Return(PyArrayObject *arr)#

This function steals a reference to arr.

This function checks to see if arr is a 0-dimensional array and, if so, returns the appropriate array scalar. It should be used whenever 0-dimensional arrays could be returned to Python.

PyObject *PyArray_Scalar(void *data, PyArray_Descr *dtype, PyObject *base)#

Return an array scalar object of the given dtype by copying from memory pointed to by data. base is expected to be the array object that is the owner of the data. base is required if dtype is a void scalar, or if the NPY_USE_GETITEM flag is set and it is known that the getitem method uses the arr argument without checking if it is NULL. Otherwise base may be NULL.

If the data is not in native byte order (as indicated by dtype->byteorder) then this function will byteswap the data, because array scalars are always in correct machine-byte order.

PyObject *PyArray_ToScalar(void *data, PyArrayObject *arr)#: Return an array scalar object of the type and itemsize indicated by the array object arr copied from the memory pointed to by data and swapping if the data in arr is not in machine byte-order.

PyObject *PyArray_FromScalar(PyObject *scalar, PyArray_Descr *outcode)#: Return a 0-dimensional array of type determined by outcode from scalar which should be an array-scalar object. If outcode is NULL, then the type is determined from scalar.

void PyArray_ScalarAsCtype(PyObject *scalar, void *ctypeptr)#: Return in ctypeptr a pointer to the actual value in an array scalar. There is no error checking so scalar must be an array-scalar object, and ctypeptr must have enough space to hold the correct type. For flexible-sized types, a pointer to the data is copied into the memory of ctypeptr, for all other types, the actual data is copied into the address pointed to by ctypeptr.

void PyArray_CastScalarToCtype(PyObject *scalar, void *ctypeptr, PyArray_Descr *outcode)#: Return the data (cast to the data type indicated by outcode) from the array-scalar, scalar, into the memory pointed to by ctypeptr (which must be large enough to handle the incoming memory).

PyObject *PyArray_TypeObjectFromType(int type)#: Returns a scalar type-object from a type-number, type . Equivalent to PyArray_DescrFromType (type)->typeobj except for reference counting and error-checking. Returns a new reference to the typeobject on success or NULL on failure.

NPY_SCALARKIND PyArray_ScalarKind(int typenum, PyArrayObject **arr)#

See the function PyArray_MinScalarType for an alternative mechanism introduced in NumPy 1.6.0.

Return the kind of scalar represented by typenum and the array in *arr (if arr is not NULL ). The array is assumed to be rank-0 and only used if typenum represents a signed integer. If arr is not NULL and the first element is negative then NPY_INTNEG_SCALAR is returned, otherwise NPY_INTPOS_SCALAR is returned. The possible return values are the enumerated values in NPY_SCALARKIND.

int PyArray_CanCoerceScalar(char thistype, char neededtype, NPY_SCALARKIND scalar)#

See the function PyArray_ResultType for details of NumPy type promotion, updated in NumPy 1.6.0.

Implements the rules for scalar coercion. Scalars are only silently coerced from thistype to neededtype if this function returns nonzero. If scalar is NPY_NOSCALAR, then this function is equivalent to PyArray_CanCastSafely. The rule is that scalars of the same KIND can be coerced into arrays of the same KIND. This rule means that high-precision scalars will never cause low-precision arrays of the same KIND to be upcast.

Data-type descriptors#

Warning

Data-type objects must be reference counted so be aware of the action on the data-type reference of different C-API calls. The standard rule is that when a data-type object is returned it is a new reference. Functions that take PyArray_Descr* objects and return arrays steal references to the data-type their inputs unless otherwise noted. Therefore, you must own a reference to any data-type object used as input to such a function.

int PyArray_DescrCheck(PyObject *obj)#: Evaluates as true if obj is a data-type object ( PyArray_Descr* ).

PyArray_Descr *PyArray_DescrNew(PyArray_Descr *obj)#: Return a new data-type object copied from obj (the fields reference is just updated so that the new object points to the same fields dictionary if any).

PyArray_Descr *PyArray_DescrNewFromType(int typenum)#: Create a new data-type object from the built-in (or user-registered) data-type indicated by typenum. All builtin types should not have any of their fields changed. This creates a new copy of the PyArray_Descr structure so that you can fill it in as appropriate. This function is especially needed for flexible data-types which need to have a new elsize member in order to be meaningful in array construction.

PyArray_Descr *PyArray_DescrNewByteorder(PyArray_Descr *obj, char newendian)#

Create a new data-type object with the byteorder set according to newendian. All referenced data-type objects (in subdescr and fields members of the data-type object) are also changed (recursively).

The value of newendian is one of these macros:

NPY_IGNORE#
NPY_SWAP#
NPY_NATIVE#
NPY_LITTLE#
NPY_BIG#: If a byteorder of NPY_IGNORE is encountered it is left alone. If newendian is NPY_SWAP, then all byte-orders are swapped. Other valid newendian values are NPY_NATIVE, NPY_LITTLE, and NPY_BIG which all cause the returned data-typed descriptor (and all it’s referenced data-type descriptors) to have the corresponding byte- order.

PyArray_Descr *PyArray_DescrFromObject(PyObject *op, PyArray_Descr *mintype)#: Determine an appropriate data-type object from the object op (which should be a “nested” sequence object) and the minimum data-type descriptor mintype (which can be NULL ). Similar in behavior to array(op).dtype. Don’t confuse this function with PyArray_DescrConverter. This function essentially looks at all the objects in the (nested) sequence and determines the data-type from the elements it finds.

PyArray_Descr *PyArray_DescrFromScalar(PyObject *scalar)#: Return a data-type object from an array-scalar object. No checking is done to be sure that scalar is an array scalar. If no suitable data-type can be determined, then a data-type of NPY_OBJECT is returned by default.

PyArray_Descr *PyArray_DescrFromType(int typenum)#: Returns a data-type object corresponding to typenum. The typenum can be one of the enumerated types, a character code for one of the enumerated types, or a user-defined type. If you want to use a flexible size array, then you need to flexible typenum and set the results elsize parameter to the desired size. The typenum is one of the NPY_TYPES.

int PyArray_DescrConverter(PyObject *obj, PyArray_Descr **dtype)#: Convert any compatible Python object, obj, to a data-type object in dtype. A large number of Python objects can be converted to data-type objects. See Data type objects (dtype) for a complete description. This version of the converter converts None objects to a NPY_DEFAULT_TYPE data-type object. This function can be used with the “O&” character code in PyArg_ParseTuple processing.

int PyArray_DescrConverter2(PyObject *obj, PyArray_Descr **dtype)#: Convert any compatible Python object, obj, to a data-type object in dtype. This version of the converter converts None objects so that the returned data-type is NULL. This function can also be used with the “O&” character in PyArg_ParseTuple processing.

int Pyarray_DescrAlignConverter(PyObject *obj, PyArray_Descr **dtype)#: Like PyArray_DescrConverter except it aligns C-struct-like objects on word-boundaries as the compiler would.

int Pyarray_DescrAlignConverter2(PyObject *obj, PyArray_Descr **dtype)#: Like PyArray_DescrConverter2 except it aligns C-struct-like objects on word-boundaries as the compiler would.

PyObject *PyArray_FieldNames(PyObject *dict)#: Take the fields dictionary, dict, such as the one attached to a data-type object and construct an ordered-list of field names such as is stored in the names field of the PyArray_Descr object.

Conversion Utilities#

For use with `PyArg_ParseTuple`#

All of these functions can be used in PyArg_ParseTuple (…) with the “O&” format specifier to automatically convert any Python object to the required C-object. All of these functions return NPY_SUCCEED if successful and NPY_FAIL if not. The first argument to all of these function is a Python object. The second argument is the address of the C-type to convert the Python object to.

Warning

Be sure to understand what steps you should take to manage the memory when using these conversion functions. These functions can require freeing memory, and/or altering the reference counts of specific objects based on your use.

int PyArray_Converter(PyObject *obj, PyObject **address)#: Convert any Python object to a PyArrayObject. If PyArray_Check (obj) is TRUE then its reference count is incremented and a reference placed in address. If obj is not an array, then convert it to an array using PyArray_FromAny . No matter what is returned, you must DECREF the object returned by this routine in address when you are done with it.

int PyArray_OutputConverter(PyObject *obj, PyArrayObject **address)#: This is a default converter for output arrays given to functions. If obj is Py_None or NULL, then *address will be NULL but the call will succeed. If PyArray_Check ( obj) is TRUE then it is returned in *address without incrementing its reference count.

int PyArray_IntpConverter(PyObject *obj, PyArray_Dims *seq)#: Convert any Python sequence, obj, smaller than NPY_MAXDIMS to a C-array of npy_intp. The Python object could also be a single number. The seq variable is a pointer to a structure with members ptr and len. On successful return, seq ->ptr contains a pointer to memory that must be freed, by calling PyDimMem_FREE, to avoid a memory leak. The restriction on memory size allows this converter to be conveniently used for sequences intended to be interpreted as array shapes.

int PyArray_BufferConverter(PyObject *obj, PyArray_Chunk *buf)#: Convert any Python object, obj, with a (single-segment) buffer interface to a variable with members that detail the object’s use of its chunk of memory. The buf variable is a pointer to a structure with base, ptr, len, and flags members. The PyArray_Chunk structure is binary compatible with the Python’s buffer object (through its len member on 32-bit platforms and its ptr member on 64-bit platforms). On return, the base member is set to obj (or its base if obj is already a buffer object pointing to another object). If you need to hold on to the memory be sure to INCREF the base member. The chunk of memory is pointed to by buf ->ptr member and has length buf ->len. The flags member of buf is NPY_ARRAY_ALIGNED with the NPY_ARRAY_WRITEABLE flag set if obj has a writeable buffer interface.

int PyArray_AxisConverter(PyObject *obj, int *axis)#: Convert a Python object, obj, representing an axis argument to the proper value for passing to the functions that take an integer axis. Specifically, if obj is None, axis is set to NPY_MAXDIMS which is interpreted correctly by the C-API functions that take axis arguments.

int PyArray_BoolConverter(PyObject *obj, npy_bool *value)#: Convert any Python object, obj, to NPY_TRUE or NPY_FALSE, and place the result in value.

int PyArray_ByteorderConverter(PyObject *obj, char *endian)#: Convert Python strings into the corresponding byte-order character: ‘>’, ‘<’, ‘s’, ‘=’, or ‘|’.

int PyArray_SortkindConverter(PyObject *obj, NPY_SORTKIND *sort)#: Convert Python strings into one of NPY_QUICKSORT (starts with ‘q’ or ‘Q’), NPY_HEAPSORT (starts with ‘h’ or ‘H’), NPY_MERGESORT (starts with ‘m’ or ‘M’) or NPY_STABLESORT (starts with ‘t’ or ‘T’). NPY_MERGESORT and NPY_STABLESORT are aliased to each other for backwards compatibility and may refer to one of several stable sorting algorithms depending on the data type.

int PyArray_SearchsideConverter(PyObject *obj, NPY_SEARCHSIDE *side)#: Convert Python strings into one of NPY_SEARCHLEFT (starts with ‘l’ or ‘L’), or NPY_SEARCHRIGHT (starts with ‘r’ or ‘R’).

int PyArray_OrderConverter(PyObject *obj, NPY_ORDER *order)#: Convert the Python strings ‘C’, ‘F’, ‘A’, and ‘K’ into the NPY_ORDER enumeration NPY_CORDER, NPY_FORTRANORDER, NPY_ANYORDER, and NPY_KEEPORDER.

int PyArray_CastingConverter(PyObject *obj, NPY_CASTING *casting)#: Convert the Python strings ‘no’, ‘equiv’, ‘safe’, ‘same_kind’, and ‘unsafe’ into the NPY_CASTING enumeration NPY_NO_CASTING, NPY_EQUIV_CASTING, NPY_SAFE_CASTING, NPY_SAME_KIND_CASTING, and NPY_UNSAFE_CASTING.

int PyArray_ClipmodeConverter(PyObject *object, NPY_CLIPMODE *val)#: Convert the Python strings ‘clip’, ‘wrap’, and ‘raise’ into the NPY_CLIPMODE enumeration NPY_CLIP, NPY_WRAP, and NPY_RAISE.

int PyArray_ConvertClipmodeSequence(PyObject *object, NPY_CLIPMODE *modes, int n)#: Converts either a sequence of clipmodes or a single clipmode into a C array of NPY_CLIPMODE values. The number of clipmodes n must be known before calling this function. This function is provided to help functions allow a different clipmode for each dimension.

Other conversions#

int PyArray_PyIntAsInt(PyObject *op)#

Convert all kinds of Python objects (including arrays and array scalars) to a standard integer. On error, -1 is returned and an exception set. You may find useful the macro:

#define error_converting(x) (((x) == -1) && PyErr_Occurred())

npy_intp PyArray_PyIntAsIntp(PyObject *op)#: Convert all kinds of Python objects (including arrays and array scalars) to a (platform-pointer-sized) integer. On error, -1 is returned and an exception set.

int PyArray_IntpFromSequence(PyObject *seq, npy_intp *vals, int maxvals)#: Convert any Python sequence (or single Python number) passed in as seq to (up to) maxvals pointer-sized integers and place them in the vals array. The sequence can be smaller then maxvals as the number of converted objects is returned.

int PyArray_TypestrConvert(int itemsize, int gentype)#: Convert typestring characters (with itemsize) to basic enumerated data types. The typestring character corresponding to signed and unsigned integers, floating point numbers, and complex-floating point numbers are recognized and converted. Other values of gentype are returned. This function can be used to convert, for example, the string ‘f4’ to NPY_FLOAT32.

Miscellaneous#

Importing the API#

In order to make use of the C-API from another extension module, the import_array function must be called. If the extension module is self-contained in a single .c file, then that is all that needs to be done. If, however, the extension module involves multiple files where the C-API is needed then some additional steps must be taken.

void import_array(void)#: This function must be called in the initialization section of a module that will make use of the C-API. It imports the module where the function-pointer table is stored and points the correct variable to it.

PY_ARRAY_UNIQUE_SYMBOL#

NO_IMPORT_ARRAY#

Using these #defines you can use the C-API in multiple files for a single extension module. In each file you must define PY_ARRAY_UNIQUE_SYMBOL to some name that will hold the C-API (e.g. myextension_ARRAY_API). This must be done before including the numpy/arrayobject.h file. In the module initialization routine you call import_array. In addition, in the files that do not have the module initialization sub_routine define NO_IMPORT_ARRAY prior to including numpy/arrayobject.h.

Suppose I have two files coolmodule.c and coolhelper.c which need to be compiled and linked into a single extension module. Suppose coolmodule.c contains the required initcool module initialization function (with the import_array() function called). Then, coolmodule.c would have at the top:

#define PY_ARRAY_UNIQUE_SYMBOL cool_ARRAY_API
#include numpy/arrayobject.h

On the other hand, coolhelper.c would contain at the top:

#define NO_IMPORT_ARRAY
#define PY_ARRAY_UNIQUE_SYMBOL cool_ARRAY_API
#include numpy/arrayobject.h

You can also put the common two last lines into an extension-local header file as long as you make sure that NO_IMPORT_ARRAY is #defined before #including that file.

Internally, these #defines work as follows:

If neither is defined, the C-API is declared to be static void**, so it is only visible within the compilation unit that #includes numpy/arrayobject.h.

If PY_ARRAY_UNIQUE_SYMBOL is #defined, but NO_IMPORT_ARRAY is not, the C-API is declared to be void**, so that it will also be visible to other compilation units.

If NO_IMPORT_ARRAY is #defined, regardless of whether PY_ARRAY_UNIQUE_SYMBOL is, the C-API is declared to be extern void**, so it is expected to be defined in another compilation unit.

Whenever PY_ARRAY_UNIQUE_SYMBOL is #defined, it also changes the name of the variable holding the C-API, which defaults to PyArray_API, to whatever the macro is #defined to.

Checking the API Version#

Because python extensions are not used in the same way as usual libraries on most platforms, some errors cannot be automatically detected at build time or even runtime. For example, if you build an extension using a function available only for numpy >= 1.3.0, and you import the extension later with numpy 1.2, you will not get an import error (but almost certainly a segmentation fault when calling the function). That’s why several functions are provided to check for numpy versions. The macros NPY_VERSION and NPY_FEATURE_VERSION corresponds to the numpy version used to build the extension, whereas the versions returned by the functions PyArray_GetNDArrayCVersion and PyArray_GetNDArrayCFeatureVersion corresponds to the runtime numpy’s version.

The rules for ABI and API compatibilities can be summarized as follows:

Whenever NPY_VERSION != PyArray_GetNDArrayCVersion(), the extension has to be recompiled (ABI incompatibility).

NPY_VERSION == PyArray_GetNDArrayCVersion() and NPY_FEATURE_VERSION <= PyArray_GetNDArrayCFeatureVersion() means backward compatible changes.

ABI incompatibility is automatically detected in every numpy’s version. API incompatibility detection was added in numpy 1.4.0. If you want to supported many different numpy versions with one extension binary, you have to build your extension with the lowest NPY_FEATURE_VERSION as possible.

NPY_VERSION#: The current version of the ndarray object (check to see if this variable is defined to guarantee the numpy/arrayobject.h header is being used).

NPY_FEATURE_VERSION#: The current version of the C-API.

unsigned int PyArray_GetNDArrayCVersion(void)#: This just returns the value NPY_VERSION. NPY_VERSION changes whenever a backward incompatible change at the ABI level. Because it is in the C-API, however, comparing the output of this function from the value defined in the current header gives a way to test if the C-API has changed thus requiring a re-compilation of extension modules that use the C-API. This is automatically checked in the function import_array.

unsigned int PyArray_GetNDArrayCFeatureVersion(void)#: New in version 1.4.0.

This just returns the value NPY_FEATURE_VERSION. NPY_FEATURE_VERSION changes whenever the API changes (e.g. a function is added). A changed value does not always require a recompile.

Internal Flexibility#

int PyArray_SetNumericOps(PyObject *dict)#

NumPy stores an internal table of Python callable objects that are used to implement arithmetic operations for arrays as well as certain array calculation methods. This function allows the user to replace any or all of these Python objects with their own versions. The keys of the dictionary, dict, are the named functions to replace and the paired value is the Python callable object to use. Care should be taken that the function used to replace an internal array operation does not itself call back to that internal array operation (unless you have designed the function to handle that), or an unchecked infinite recursion can result (possibly causing program crash). The key names that represent operations that can be replaced are:

add, subtract, multiply, divide, remainder, power, square, reciprocal, ones_like, sqrt, negative, positive, absolute, invert, left_shift, right_shift, bitwise_and, bitwise_xor, bitwise_or, less, less_equal, equal, not_equal, greater, greater_equal, floor_divide, true_divide, logical_or, logical_and, floor, ceil, maximum, minimum, rint.

These functions are included here because they are used at least once in the array object’s methods. The function returns -1 (without setting a Python Error) if one of the objects being assigned is not callable.

Deprecated since version 1.16.

PyObject *PyArray_GetNumericOps(void)#: Return a Python dictionary containing the callable Python objects stored in the internal arithmetic operation table. The keys of this dictionary are given in the explanation for PyArray_SetNumericOps.

Deprecated since version 1.16.

void PyArray_SetStringFunction(PyObject *op, int repr)#: This function allows you to alter the tp_str and tp_repr methods of the array object to any Python function. Thus you can alter what happens for all arrays when str(arr) or repr(arr) is called from Python. The function to be called is passed in as op. If repr is non-zero, then this function will be called in response to repr(arr), otherwise the function will be called in response to str(arr). No check on whether or not op is callable is performed. The callable passed in to op should expect an array argument and should return a string to be printed.

Memory management#

char *PyDataMem_NEW(size_t nbytes)#

void PyDataMem_FREE(char *ptr)#

char *PyDataMem_RENEW(void *ptr, size_t newbytes)#: Macros to allocate, free, and reallocate memory. These macros are used internally to create arrays.

npy_intp *PyDimMem_NEW(int nd)#

void PyDimMem_FREE(char *ptr)#

npy_intp *PyDimMem_RENEW(void *ptr, size_t newnd)#: Macros to allocate, free, and reallocate dimension and strides memory.

void *PyArray_malloc(size_t nbytes)#

void PyArray_free(void *ptr)#

void *PyArray_realloc(npy_intp *ptr, size_t nbytes)#

These macros use different memory allocators, depending on the constant NPY_USE_PYMEM. The system malloc is used when NPY_USE_PYMEM is 0, if NPY_USE_PYMEM is 1, then the Python memory allocator is used.

NPY_USE_PYMEM#

int PyArray_ResolveWritebackIfCopy(PyArrayObject *obj)#

If obj.flags has NPY_ARRAY_WRITEBACKIFCOPY, this function clears the flags, DECREF s obj->base and makes it writeable, and sets obj->base to NULL. It then copies obj->data to obj->base->data, and returns the error state of the copy operation. This is the opposite of PyArray_SetWritebackIfCopyBase. Usually this is called once you are finished with obj, just before Py_DECREF(obj). It may be called multiple times, or with NULL input. See also PyArray_DiscardWritebackIfCopy.

Returns 0 if nothing was done, -1 on error, and 1 if action was taken.

Threading support#

These macros are only meaningful if NPY_ALLOW_THREADS evaluates True during compilation of the extension module. Otherwise, these macros are equivalent to whitespace. Python uses a single Global Interpreter Lock (GIL) for each Python process so that only a single thread may execute at a time (even on multi-cpu machines). When calling out to a compiled function that may take time to compute (and does not have side-effects for other threads like updated global variables), the GIL should be released so that other Python threads can run while the time-consuming calculations are performed. This can be accomplished using two groups of macros. Typically, if one macro in a group is used in a code block, all of them must be used in the same code block. Currently, NPY_ALLOW_THREADS is defined to the python-defined WITH_THREADS constant unless the environment variable NPY_NOSMP is set in which case NPY_ALLOW_THREADS is defined to be 0.

NPY_ALLOW_THREADS#

WITH_THREADS#

Group 1#

This group is used to call code that may take some time but does not use any Python C-API calls. Thus, the GIL should be released during its calculation.

NPY_BEGIN_ALLOW_THREADS#

Equivalent to Py_BEGIN_ALLOW_THREADS except it uses NPY_ALLOW_THREADS to determine if the macro if replaced with white-space or not.

NPY_END_ALLOW_THREADS#

Equivalent to Py_END_ALLOW_THREADS except it uses NPY_ALLOW_THREADS to determine if the macro if replaced with white-space or not.

NPY_BEGIN_THREADS_DEF#

Place in the variable declaration area. This macro sets up the variable needed for storing the Python state.

NPY_BEGIN_THREADS#

Place right before code that does not need the Python interpreter (no Python C-API calls). This macro saves the Python state and releases the GIL.

NPY_END_THREADS#

Place right after code that does not need the Python interpreter. This macro acquires the GIL and restores the Python state from the saved variable.

void NPY_BEGIN_THREADS_DESCR(PyArray_Descr *dtype)#

Useful to release the GIL only if dtype does not contain arbitrary Python objects which may need the Python interpreter during execution of the loop.

void NPY_END_THREADS_DESCR(PyArray_Descr *dtype)#

Useful to regain the GIL in situations where it was released using the BEGIN form of this macro.

void NPY_BEGIN_THREADS_THRESHOLDED(int loop_size)#

Useful to release the GIL only if loop_size exceeds a minimum threshold, currently set to 500. Should be matched with a NPY_END_THREADS to regain the GIL.

Group 2#

This group is used to re-acquire the Python GIL after it has been released. For example, suppose the GIL has been released (using the previous calls), and then some path in the code (perhaps in a different subroutine) requires use of the Python C-API, then these macros are useful to acquire the GIL. These macros accomplish essentially a reverse of the previous three (acquire the LOCK saving what state it had) and then re-release it with the saved state.

NPY_ALLOW_C_API_DEF#

Place in the variable declaration area to set up the necessary variable.

NPY_ALLOW_C_API#

Place before code that needs to call the Python C-API (when it is known that the GIL has already been released).

NPY_DISABLE_C_API#

Place after code that needs to call the Python C-API (to re-release the GIL).

Tip

Never use semicolons after the threading support macros.

Priority#

NPY_PRIORITY#: Default priority for arrays.

NPY_SUBTYPE_PRIORITY#: Default subtype priority.

NPY_SCALAR_PRIORITY#: Default scalar priority (very small)

double PyArray_GetPriority(PyObject *obj, double def)#: Return the __array_priority__ attribute (converted to a double) of obj or def if no attribute of that name exists. Fast returns that avoid the attribute lookup are provided for objects of type PyArray_Type.

Default buffers#

NPY_BUFSIZE#: Default size of the user-settable internal buffers.

NPY_MIN_BUFSIZE#: Smallest size of user-settable internal buffers.

NPY_MAX_BUFSIZE#: Largest size allowed for the user-settable buffers.

Other constants#

NPY_NUM_FLOATTYPE#: The number of floating-point types

NPY_MAXDIMS#: The maximum number of dimensions allowed in arrays.

NPY_MAXARGS#: The maximum number of array arguments that can be used in functions.

NPY_FALSE#: Defined as 0 for use with Bool.

NPY_TRUE#: Defined as 1 for use with Bool.

NPY_FAIL#: The return value of failed converter functions which are called using the “O&” syntax in PyArg_ParseTuple-like functions.

NPY_SUCCEED#: The return value of successful converter functions which are called using the “O&” syntax in PyArg_ParseTuple-like functions.

Miscellaneous Macros#

int PyArray_SAMESHAPE(PyArrayObject *a1, PyArrayObject *a2)#: Evaluates as True if arrays a1 and a2 have the same shape.

PyArray_MAX(a, b)#: Returns the maximum of a and b. If (a) or (b) are expressions they are evaluated twice.

PyArray_MIN(a, b)#: Returns the minimum of a and b. If (a) or (b) are expressions they are evaluated twice.

PyArray_CLT(a, b)#

PyArray_CGT(a, b)#

PyArray_CLE(a, b)#

PyArray_CGE(a, b)#

PyArray_CEQ(a, b)#

PyArray_CNE(a, b)#: Implements the complex comparisons between two complex numbers (structures with a real and imag member) using NumPy’s definition of the ordering which is lexicographic: comparing the real parts first and then the complex parts if the real parts are equal.

npy_intp PyArray_REFCOUNT(PyObject *op)#: Returns the reference count of any Python object.

void PyArray_DiscardWritebackIfCopy(PyObject *obj)#: If obj.flags has NPY_ARRAY_WRITEBACKIFCOPY, this function clears the flags, DECREF s obj->base and makes it writeable, and sets obj->base to NULL. In contrast to PyArray_DiscardWritebackIfCopy it makes no attempt to copy the data from obj->base This undoes PyArray_SetWritebackIfCopyBase. Usually this is called after an error when you are finished with obj, just before Py_DECREF(obj). It may be called multiple times, or with NULL input.

void PyArray_XDECREF_ERR(PyObject *obj)#

Deprecated in 1.14, use PyArray_DiscardWritebackIfCopy followed by Py_XDECREF

DECREF’s an array object which may have the NPY_ARRAY_WRITEBACKIFCOPY flag set without causing the contents to be copied back into the original array. Resets the NPY_ARRAY_WRITEABLE flag on the base object. This is useful for recovering from an error condition when writeback semantics are used, but will lead to wrong results.

Enumerated Types#

enum NPY_SORTKIND#

A special variable-type which can take on different values to indicate the sorting algorithm being used.

enumerator NPY_QUICKSORT#

enumerator NPY_HEAPSORT#

enumerator NPY_MERGESORT#

enumerator NPY_STABLESORT#: Used as an alias of NPY_MERGESORT and vica versa.

enumerator NPY_NSORTS#: Defined to be the number of sorts. It is fixed at three by the need for backwards compatibility, and consequently NPY_MERGESORT and NPY_STABLESORT are aliased to each other and may refer to one of several stable sorting algorithms depending on the data type.

enum NPY_SCALARKIND#

A special variable type indicating the number of “kinds” of scalars distinguished in determining scalar-coercion rules. This variable can take on the values:

enumerator NPY_NOSCALAR#

enumerator NPY_BOOL_SCALAR#

enumerator NPY_INTPOS_SCALAR#

enumerator NPY_INTNEG_SCALAR#

enumerator NPY_FLOAT_SCALAR#

enumerator NPY_COMPLEX_SCALAR#

enumerator NPY_OBJECT_SCALAR#

enumerator NPY_NSCALARKINDS#: Defined to be the number of scalar kinds (not including NPY_NOSCALAR).

enum NPY_ORDER#

An enumeration type indicating the element order that an array should be interpreted in. When a brand new array is created, generally only NPY_CORDER and NPY_FORTRANORDER are used, whereas when one or more inputs are provided, the order can be based on them.

enumerator NPY_ANYORDER#: Fortran order if all the inputs are Fortran, C otherwise.

enumerator NPY_CORDER#: C order.

enumerator NPY_FORTRANORDER#: Fortran order.

enumerator NPY_KEEPORDER#: An order as close to the order of the inputs as possible, even if the input is in neither C nor Fortran order.

enum NPY_CLIPMODE#

A variable type indicating the kind of clipping that should be applied in certain functions.

enumerator NPY_RAISE#: The default for most operations, raises an exception if an index is out of bounds.

enumerator NPY_CLIP#: Clips an index to the valid range if it is out of bounds.

enumerator NPY_WRAP#: Wraps an index to the valid range if it is out of bounds.

enum NPY_SEARCHSIDE#

A variable type indicating whether the index returned should be that of the first suitable location (if NPY_SEARCHLEFT) or of the last (if NPY_SEARCHRIGHT).

enumerator NPY_SEARCHLEFT#

enumerator NPY_SEARCHRIGHT#

enum NPY_SELECTKIND#

A variable type indicating the selection algorithm being used.

enumerator NPY_INTROSELECT#

enum NPY_CASTING#

New in version 1.6.

An enumeration type indicating how permissive data conversions should be. This is used by the iterator added in NumPy 1.6, and is intended to be used more broadly in a future version.

enumerator NPY_NO_CASTING#: Only allow identical types.

enumerator NPY_EQUIV_CASTING#: Allow identical and casts involving byte swapping.

enumerator NPY_SAFE_CASTING#: Only allow casts which will not cause values to be rounded, truncated, or otherwise changed.

enumerator NPY_SAME_KIND_CASTING#: Allow any safe casts, and casts between types of the same kind. For example, float64 -> float32 is permitted with this rule.

enumerator NPY_UNSAFE_CASTING#: Allow any cast, no matter what kind of data loss may occur.

Array API#

Array structure and data access#

Data access#

Creating arrays#

From scratch#

From other objects#

Dealing with types#

General check of Python Type#

Data-type checking#

Converting data types#

User-defined data types#

Special functions for NPY_OBJECT#

Array flags#

Basic Array Flags#

Combinations of array flags#

Flag-like constants#

Flag checking#

Array method alternative API#

Conversion#

Shape Manipulation#

Item selection and manipulation#

Calculation#

Functions#

Array Functions#

Other functions#

Auxiliary Data With Object Semantics#

Array Iterators#

Broadcasting (multi-iterators)#

Neighborhood iterator#

Array mapping#

Array Scalars#

Data-type descriptors#

Conversion Utilities#

For use with PyArg_ParseTuple#

Other conversions#

Miscellaneous#

Importing the API#

Checking the API Version#

Internal Flexibility#

Memory management#

Threading support#

Group 1#

Group 2#

Priority#

Default buffers#

Other constants#

Miscellaneous Macros#

Enumerated Types#

For use with `PyArg_ParseTuple`#