Advanced debugging tools#

If you reached here, you want to dive into, or use, more advanced tooling. This is usually not necessary for first time contributors and most day-to-day development. These are used more rarely, for example close to a new NumPy release, or when a large or particular complex change was made.

Since not all of these tools are used on a regular bases and only available on some systems, please expect differences, issues, or quirks; we will be happy to help if you get stuck and appreciate any improvements or suggestions to these workflows.

Finding C errors with additional tooling#

Most development will not require more than a typical debugging toolchain as shown in Debugging. But for example memory leaks can be particularly subtle or difficult to narrow down.

We do not expect any of these tools to be run by most contributors. However, you can ensure that we can track down such issues more easily:

  • Tests should cover all code paths, including error paths.

  • Try to write short and simple tests. If you have a very complicated test consider creating an additional simpler test as well. This can be helpful, because often it is only easy to find which test triggers an issue and not which line of the test.

  • Never use np.empty if data is read/used. valgrind will notice this and report an error. When you do not care about values, you can generate random values instead.

This will help us catch any oversights before your change is released and means you do not have to worry about making reference counting errors, which can be intimidating.

Python debug build#

Debug builds of Python are easily available for example via the system package manager on Linux systems, but are also available on other platforms, possibly in a less convenient format. If you cannot easily install a debug build of Python from a system package manager, you can build one yourself using pyenv. For example, to install and globally activate a debug build of Python 3.10.8, one would do:

pyenv install -g 3.10.8
pyenv global 3.10.8

Note that pyenv install builds Python from source, so you must ensure that Python’s dependencies are installed before building, see the pyenv documentation for platform-specific installation instructions. You can use pip to install Python dependencies you may need for your debugging session. If there is no debug wheel available on pypi, you will need to build the dependencies from source and ensure that your dependencies are also compiled as debug builds.

Often debug builds of Python name the Python executable pythond instead of python. To check if you have a debug build of Python installed, you can run e.g. pythond -m sysconfig to get the build configuration for the Python executable. A debug build will be built with debug compiler options in CFLAGS (e.g. -g -Og).

Running the Numpy tests or an interactive terminal is usually as easy as:

python3.8d runtests.py
# or
python3.8d runtests.py --ipython

and were already mentioned in Debugging.

A Python debug build will help:

  • Find bugs which may otherwise cause random behaviour. One example is when an object is still used after it has been deleted.

  • Python debug builds allows to check correct reference counting. This works using the additional commands:

    sys.gettotalrefcount()
    sys.getallocatedblocks()
    
  • Python debug builds allow easier debugging with gdb and other C debuggers.

Use together with pytest#

Running the test suite only with a debug python build will not find many errors on its own. An additional advantage of a debug build of Python is that it allows detecting memory leaks.

A tool to make this easier is pytest-leaks, which can be installed using pip. Unfortunately, pytest itself may leak memory, but good results can usually (currently) be achieved by removing:

@pytest.fixture(autouse=True)
def add_np(doctest_namespace):
    doctest_namespace['np'] = numpy

@pytest.fixture(autouse=True)
def env_setup(monkeypatch):
    monkeypatch.setenv('PYTHONHASHSEED', '0')

from numpy/conftest.py (This may change with new pytest-leaks versions or pytest updates).

This allows to run the test suite, or part of it, conveniently:

python3.8d runtests.py -t numpy/core/tests/test_multiarray.py -- -R2:3 -s

where -R2:3 is the pytest-leaks command (see its documentation), the -s causes output to print and may be necessary (in some versions captured output was detected as a leak).

Note that some tests are known (or even designed) to leak references, we try to mark them, but expect some false positives.

valgrind#

Valgrind is a powerful tool to find certain memory access problems and should be run on complicated C code. Basic use of valgrind usually requires no more than:

PYTHONMALLOC=malloc valgrind python runtests.py

where PYTHONMALLOC=malloc is necessary to avoid false positives from python itself. Depending on the system and valgrind version, you may see more false positives. valgrind supports “suppressions” to ignore some of these, and Python does have a suppression file (and even a compile time option) which may help if you find it necessary.

Valgrind helps:

  • Find use of uninitialized variables/memory.

  • Detect memory access violations (reading or writing outside of allocated memory).

  • Find many memory leaks. Note that for most leaks the python debug build approach (and pytest-leaks) is much more sensitive. The reason is that valgrind can only detect if memory is definitely lost. If:

    dtype = np.dtype(np.int64)
    arr.astype(dtype=dtype)
    

    Has incorrect reference counting for dtype, this is a bug, but valgrind cannot see it because np.dtype(np.int64) always returns the same object. However, not all dtypes are singletons, so this might leak memory for different input. In rare cases NumPy uses malloc and not the Python memory allocators which are invisible to the Python debug build. malloc should normally be avoided, but there are some exceptions (e.g. the PyArray_Dims structure is public API and cannot use the Python allocators.)

Even though using valgrind for memory leak detection is slow and less sensitive it can be a convenient: you can run most programs with valgrind without modification.

Things to be aware of:

  • Valgrind does not support the numpy longdouble, this means that tests will fail or be flagged errors that are completely fine.

  • Expect some errors before and after running your NumPy code.

  • Caches can mean that errors (specifically memory leaks) may not be detected or are only detect at a later, unrelated time.

A big advantage of valgrind is that it has no requirements aside from valgrind itself (although you probably want to use debug builds for better tracebacks).

Use together with pytest#

You can run the test suite with valgrind which may be sufficient when you are only interested in a few tests:

PYTHOMMALLOC=malloc valgrind python runtests.py \
 -t numpy/core/tests/test_multiarray.py -- --continue-on-collection-errors

Note the --continue-on-collection-errors, which is currently necessary due to missing longdouble support causing failures (this will usually not be necessary if you do not run the full test suite).

If you wish to detect memory leaks you will also require --show-leak-kinds=definite and possibly more valgrind options. Just as for pytest-leaks certain tests are known to leak cause errors in valgrind and may or may not be marked as such.

We have developed pytest-valgrind which:

  • Reports errors for each test individually

  • Narrows down memory leaks to individual tests (by default valgrind only checks for memory leaks after a program stops, which is very cumbersome).

Please refer to its README for more information (it includes an example command for NumPy).